Loading...
HomeMy WebLinkAbout4660 Quay StreetV i CITY OF WHEAT RIDGE Building Inspection Division (303) 235-2855 Office INSPECTION NOTICE Inspection Type: Job Address: Permit Number: J No one available for inspection: Time AM/PM Re -Inspection required: Yes No When corrections are complete, schedule re -inspection online. Date: Inspector: DO NOT REMOVE THIS NOTICE A i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 237-8929 Fax INSPECTION NOTICE Inspection Type: f �� Job Address: Permit Number: ❑ No one available for inspection: TimeAOM Re -Inspection required: Yes No When corrections have been made, call for re -inspection at 303-234-5933 Date: ;` Inspector:___ DO NOT REMOVE THIS NOTICE i CITY OF WHEAT RIDGE K Building Inspection Division (303) 235-2855 Office INSPECTION NOTICE Inspection Type:'' / Job Address: Permit Number: ❑ No one available for inspection: Time AM/PM`, Re -Inspection required: Yes ..'`No' When corrections have been made, schedule for re -inspection online at: http://www. ci. wheatridge. co, usfinspection Date: / - ~ ?e2'c�_ bspector: DO NOT REMOVE THIS NOTICE i CITY OF WHEAT RIDGE - Building Inspection Division (303) 235-2855 Office INSPECTION NOTICE Inspection Type: Job Address: Permit Number: ❑ No one available for inspection: Time AM/PM Re -Inspection required: Yes No When corrections have been made, schedule for re -inspection online at. http://www. ci. wheatridge. co. uslinspection Date: Inspector: ..`' DO NOT REMOVE THIS NOTICE � ► � i City of Wheat Ridge Homeowner Interior Remodel PERMIT - 202002002 PERMIT NO: 202002002 ISSUED: 10/27/2020 JOB ADDRESS: 4660 Quay St EXPIRES: 10/27/2021 JOB DESCRIPTION: Replacing load-bearing wall with mono -posts and header basement. Sq f t. : l l2 *** CONTACTS *** OWNER (765)586-6696 JOHNSON ADAM *** PARCEL INFO *** ZONE CODE: UA / Unassigned USE: UA / Unassigned SUBDIVISION CODE: 2405 / BARTHS, COULEHAN GRANGE, WHEAT BLOCK/LOT#: 0 / *** FEE SUMMARY *** ESTIMATED PROJECT VALUATION: 750.00 FEES Total Valuation 0.00 Plan Review Fee 23.86 Use Tax 15.75 Permit Fee 36.70 ** TOTAL ** 76.31 *** COMMENTS *** *** CONDITIONS *** A printed copy of the permit and city stamped on-site plans must be available on-site for the first inspection. I, the property owner, by my signature, attest that I currently reside at the project property, intend to reside at the property for a period of one year after completion of the project, and am personally performing all work, without the assistance of hired or professional workers. If professionals are hired, those contractors are licensed with the City of Wheat Ridge and are listed on the permit. NOTE: Consultations and inspections will only be performed with the homeowner of record present. All roughs to be done at Framing Inspection. A printed copy of the permit and city stamped on-site plans must be available on-site for the first inspection. Approved per plans and red -line notes on plans. Must comply with 2018 IRC, 2020 NEC and all applicable City of Wheat Ridge Municipal Codes. Work is subject to field inspections. 1* � � i City of Wheat Ridge �� Homeowner Interior Remodel PERMIT - 202002002 PERMIT NO: 202002002 ISSUED: 10/27/2020 JOB ADDRESS: 4660 Quay St EXPIRES: 10/27/2021 JOB DESCRIPTION: Replacing load-bearing wall with mono -posts and header basement. Sq f t. : l l2 I, by my signature, do hereby attest that the work to be performed shall comply with all accompanying approved plans and specifications, applicable building codes, and all applicable municipal codes, policies and procedures, and that I am the legal owner or have been authorized by the legal owner of the property and am authorized to obtain this permit and perform the work described and approved in conjunction with this�permrt. I further attest that I am leg ally authorized to include all entities named within this document as parties to the work to be performed and that all work to be performed is disclosed in this document and/or its' accompanying approved plans and specifications. Signature of OWNER or CONTRACTOR (Circle one) Date 1, This permit was issued based on the information provided in the permit application and accompanying plans and specifications and is subject to the compliance with those documents, and all applicable statutes, ordinances, regulations, policies and procedures. 2. This.permit shall expire 365 days after the date of issuance regardless of activity. Requests for extension must be made in writing and received prior to the date of expiration. An extension of no more than 180, days made be granted at the discretion of the Chief Building Official and may be subject to a fee equal to one-half of the original permit fee. 3. If this permit expires, a new permit may be required to be obtained. Issuance of a new permit shall be subject to the standard requirements, fees and��procedures for approval of any new permit. Re -issuance or extension of expired permits is at the sole discretion of the Chief Building Official and is not guaranteed. 4. No work of any manner shall be performed that shall results in a change of the natural flow of water without prior and specific approval. 5. The permit holder shall notify the Building and Inspection Services Division in accordance with established policy of all requ�ired inspections and shall not proceed or conceal work without written approval of such work from the Building and Inspection Services Division. 6. The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, anviolation of any provision of any applicable code or any ordinance or regulation of this jurisdiction. Approval of work is subject to field inspection. Signature of Chief Building Official Date REQUESTS MUST BE MADE BY 11:59PM ANY BUSINESS DAY FOR INSPECTION THE FOLLOWING BUSINESS DAY. no change to valuation From: no-reolv(alci.wheatridae.m. us To: CommDev Farm is Subject: Online Form Submittal: Residential Interior Remodel Date: Friday, October 2, 2020 4:59:10 PM Residential Interior Remodel This application is exclusively for Residential Interior Remodels and other scopes of work which do not have a specific form already available. YOU MUST ATTACH A VALID CREDIT CARD AUTHORIZATION FORM IN ORDER FOR THE PERMIT TO BE PROCESSED. Your Permit will be emailed to the email address provided below once it is processed. THIS APPLICATION DOES NOT CONSTITUTE A PERMIT. DO NOT BEGIN WORK UNTIL PERMIT HAS BEEN ISSUED. PROPERTY INFORMATION Property Address 4660 Quay Street Property Owner Name Adam Johnson Property Owner Phone 765-586-6696 Number (enter WITH dashes, eg 303-123- 4567) Property Owner Email adamadamadam48@gmail.com Address Attach City of Wheat Electron ic-Payment-Form. odf AdamJohnson 10022020.odf Ridge Electronic Payment Form - "DO NOT ATTACH A PICTURE OF A CREDIT CARD" APPLICANT INFORMATION Applicant Name Adam Johnson What is your role in the Property Owner project? Contact Phone Number 765-586-6696 (enter WITH dashes, eg 303-123-4567) Contact Email Address for Plan Review Comments Retype Contractor Email Address DESCRIPTION OF WORK Detailed Scope of Work - Provide a detailed description of work including mechanical, electrical, plumbing work occurring, adding/removing walls, etc Location of Work Square Footage Area of Work Being Performed amendez@levelinspectionsco.com amendez@levelinspectionsco.com replacing load-bearing wall with mono -posts and header basement < 112 sq. ft. Asbestos Report Field not completed. Upload letter size documents here Construction Plans scanned on 11'x17" or larger Project Value (contract value or cost of ALL materials and labor) Field not completed. 7123 Asem Rev 1 - Basement Wall Removal sianed.odf $750 ok bf 10/13/2020 SIGNATURE OF UNDERSTANDING AND AGREEMENT I assume full Yes responsibility for compliance with applicable City of Wheat Ridge codes and ordinances for work under any permit issued based on this application. I understand that work Yes may not begin on this property until a permit has been issued and posted on the property. I certify that I have Yes been authorized by the legal owner of the property to submit this application and to perform the work described above. Person Applying for Adam Johnson Permit I attest that everything Yes stated in this application is true and correct and that falsifying information in this application is an act of fraud and may be punishable by fine, imprisonment, or both. Email not displaying correctly? View it in your browser. City Of ::Or heat W g COMMON iTY DEVELOPMENT Official Certification %J Property Owner Permit THIS IS OCthat I, the property owner, by my signature, attest that I currently reside at the project property, or intend to reside at the property for a period of one year after completion of the project, and am personally performing all work, without the assistance of hired or professional workers, or, if hiring sub -contractors, list them on the permit. Consultations and inspections will only be performed with the homeowner of record present at the project property. Property must be in individuals' name, not a company. Property Owner(s): Project Property: +7 J yp: Notarized sign�� of Applicant State of Colorado } County of r� G� } ss Th foregoing instrument was acknowledged by me this Notary Public �_ day of o c MARIAN HUNT NOTARY PUBLIC STATE OF COLORADO NOTARY ID 20194047825 �-... COMMISSION EXPIRES DECEMBER 27, 20231 My Commission Expires l Z /�20 DS Environmental CONSULTING "The trusted choice for your environmental & industrial hygiene needs." PRESENTED TO: Mr. Adam Johnson (765) 586-6696 Johnson_adam_s@bah.com Front Range 7555 W 10th Ave Suite A, Lakewood, CO 80214 ASBESTOS INSPECTION REPORT 4660 Quay St, Wheat Ridge, Colorado INSPECTED BY: Mr. Zack Westfall DS Environmental Cell: (303) 304-1329 Mountains PO Box 6864 Avon, CO 81620 Web dsconsultinginc.com Direct (303) 286-9094 PROJECT DETAILS: DS Job Number: 21718 Date of Inspection: October 19, 2020 Ivo A ;MI touna per report. RS City of Wheat Ridge Building Division Western Slope PO Box 3793 Aspen, CO 81612 Fax (303) 986-0121 Table of Contents 1.0 Introduction 2.0 Limitations of Inspection 3.0 Conclusions & Summary of Findings 4.0 Material Information 5.0 Inspector & Firm Certifications 6.0 Inspection, Sampling & Analytical Procedures 7.0 Recommendations 8.0 Asbestos Abatement & Demolition Requirements 9.0 Major & Minor Asbestos Spill Response Actions 10.0 Project Design & Project Manager Requirements 11.0 Disclaimer & Limitations 12.0 Copyright Notice APPENDIX A CERTIFICATIONS APPENDIX B LABORATORY REPORT PJ City of Wheat Ridge Building Division 1.0 Introduction Mr. Zack Westfall with DS Environmental Consulting (DS) conducted an asbestos inspection and collected bulk - samples of suspect asbestos -containing building materials within the single-family residence detailed on the cover page of this report. The purpose of the inspection was to determine if any of the materials that may be impacted by the renovation activities contain asbestos. 2.0 Limitations of Inspection This inspection was limited in its scope and only included specific areas and materials as defined by the client. The inspection did not constitute a full -building inspection and does not fulfill the asbestos inspection requirements for structures that are to be demolished. The table below, (Table 1.0), lists the suspect asbestos -containing materials included in the scope of the inspection. It identifies the specific areas that were included in the inspection as well descriptions of the suspect asbestos -containing materials in those areas that were sampled; or materials that were assumed to contain asbestos. The suspect asbestos -containing materials listed below may be found in other areas of the building that were outside of the scope of work for this inspection and sampling. Additionally, there may be other materials in other parts of the building that contain asbestos, which were not included in the scope of this inspection and sampling. Table 1.0 Scope of Work Materials in RED are materials that contain greater than 1% asbestos or are assumed to contain >1% asbestos. Materials in GREEN contain 1% or less asbestos Materials in BLACK do not contain asbestos. Suspect Asbestos -Containing Materials Sampled Material Locations Homogeneous Area 1(FT1) 12x12 White/Tan Mottled . Basement Floor Floor Tile with Yellow Mastic Homogeneous Area 2 (CT1) White, Nailed -On Ceiling Tiles Ceiling in Basement Doorway of Middle Dividing Wall 3 City of Wheat Ridge Building Division 3.0 Conclusions & Summary of Findings Materials in RED are materials that contain greater than 1% asbestos or are assumed to contain >1% asbestos. Materials in GREEN contain 1% or less asbestos Materials in BLACK do not contain asbestos. Sample Information ACRONYMS ACM ASSESSMENT CATEGORIES 1—damaged/significantly damaged thermal system insulation ACM SUMMARY OF CHRY— Chrysotile ACT—Actinolite 2—damaged friable surfacing material ACM FINDINGS TR— Trace; >1%Asbestos 3— significantly da maged fria ble surfacing material ACM a ND — None -detected 4— damaged or significantly damaged friable miscellaneous material ACM ACM —Asbestos Containing 5 —ACM with the potential for damage Condition: Good Material (>J% asbestos) 6—ACM with the potential for significant damage Quantity: —8 ft' 7—any remaining friable ACM or friable suspected ACM Materials in RED are materials that contain greater than 1% asbestos or are assumed to contain >1% asbestos. Materials in GREEN contain 1% or less asbestos Materials in BLACK do not contain asbestos. Sample Information Material Information Asbestos Content Description: 12x12 White/Tan Mottled Floor Tile W Sample ID: FT1-1 with Yellow Mastic a Sample Location: Basement Floor Near Classification: Miscellaneous Material V) Middle Doorway Condition: Good z Quantity: —8 ft' ND w Sample ID: FT1-2 pSample Location: Basement Floor Near Friability: Non -Friable 2 Middle Doorway Assessment Category: No Category (Non -ACM) = Reason for Assessment: N Description: White, Nailed -On Ceiling Tiles W Sample ID: CT1-1 cc a Sample Location: Ceiling of Dividing Wall Classification: Miscellaneous Material V) Doorway in Basement Condition: Good uantit : ^1 ft2 ND w Sample ID: CT1-2 Friability: Friable �0 Sample Location: Ceiling of Dividing Wall g g Assessment Category: No Category (Non -ACM) Doorway in Basement Reason for Assessment: x City of Wheat Ridge 4 Building Division 4.0 Material Information A Homogeneous Area (HA) means an area of surfacing material, thermal system insulation material, or miscellaneous material that is uniform in color and texture. The asbestos content of the bulk -samples collected within a homogeneous area can be applied to the entire homogenous area, if they conform to the above characteristics and the regulated minimum sample quantities of each type of material have been collected and analyzed. An Asbestos Containing Material (ACM) is a material that contains more than 1% asbestos. Any material can be assumed to be an ACM, but not the contrary. 4.1 Material Friability A material can either be friable or non friable. A friable material is one that, when dry, can be pulverized, or reduced to powder by hand pressure, a non -friable material cannot. A non -friable material may become friable if its condition had deteriorated or has been impacted by forces that have rendered it friable. 4.2 Material Classifications Sampled materials are divided into one of the following three categories: • Surfacing Material: sprayed or troweled onto structural building members • Thermal System Insulation (TSI): any type of pipe, boiler, tank, or duct insulation • Miscellaneous Material: all other materials not classified in the above two categories 4.3 Material Conditions Sampled materials are placed into one of the following three categories of conditions: • Good: none to very little visible damage or deterioration • Damaged: the surface is crumbling, blistered, water -stained, gouged, marred or otherwise abraded over less than one-tenth of the surface if the damage is evenly distributed, or one-quarter if the damage is localized • Significantly Damaged: the surface is crumbling, blistered, water -stained, gouged, marred or otherwise abraded over greater than one-tenth of the surface if the damage is evenly distributed, or one-quarter if the damage is localized 4.4 Sample Quantities DS collected at least the minimum number of samples from each homogeneous area necessary to meet all regulatory requirements for the quantity of material to be disturbed in the scope of work as defined by the client. The quantities listed in this report are approximate and on-site verification of the exact quantity of each material is required for permitting, estimating and billing purposes. The following outlines the minimum sample quantities required per homogeneous area: • Surfacing Materials: up to 1,000ft2 of material requires a minimum of three (3) samples; between 1,000 ftZ and 5,000 ftZ of material requires a minimum of five (5) samples; over 5,000 ftZ of material requires a minimum of seven (7) samples; one (1) sample of each patch • Thermal System Insulation (TSI): each homogeneous area requires a minimum of three (3) samples; at least one (1) sample must be collected from each patch; and collect enough samples sufficient to adequately assess the material and determine the asbestos content for TSI fittings such as pipe elbows or T's, which a minimum of two (2) samples of each City of 5 Wheat Ridge Building Division • Miscellaneous Materials: collect enough samples sufficient to determine the asbestos content with a minimum of two (2) samples of each 4.5 Materials Reporting `TRACE" Results Any sample reporting a "TRACE" amount of asbestos shall be considered to contain greater than 1% asbestos unless it is further analyzed utilizing the point -count method and verified to be less than or equal to 1% asbestos content, and therefore not an ACM. TRACE does not mean it contains less than or equal to 1%. 4.6 Materials Containing 1% Asbestos or Less Materials containing less than or equal to 1% asbestos are not regulated by the Colorado Department of Public Health and Environment (CDPHE) Regulation 8, Part B — Asbestos. However, all demolition/abatement activities should be performed following the applicable Occupational Safety and Health Administration (OSHA) regulations. This includes, but is not limited to, the appropriate asbestos training for the type of material being removed/disturbed as well as having a properly trained supervisor onsite, using wet removal methods, wearing adequate personal protective equipment (HEPA-filtered particulate respirators), medical surveillance of workers, personal -exposure air monitoring, area air monitoring in occupied buildings, etc. There may also be landfill disposal requirements for these materials, depending on the facility. DS recommends that all demolition/renovation projects involving the disturbance of any amount of asbestos be subjected to post - work visual inspections and a final clearance air testing by a CDPHE-certified Asbestos Air Monitoring Specialist (AMS) after the work has been completed, but before any containments are dismantled, the contractor demobilizes, and the area is reoccupied. 4.7 Overspray Any surfacing material indicated in this report also includes any associated overspray of that material, e.g., under carpet, above suspended ceilings, on studs and structural members, etc. 5.0 Inspector & Firm Certifications The inspection detailed within this report was conducted by Mr. Zack Westfall with DS. DS is a CDPHE certified Asbestos Consulting Firm, Registration No. 14912. Mr. Westfall is a CDPHE certified Building Inspector; having certification number 22529 (see Appendix A for certificates). 6.0 Inspection, Sampling & Analytical Procedures 6.1 Inspection Procedures The asbestos inspection detailed in this report was conducted by an Environmental Protection Agency (EPA) and CDPHE certified asbestos Building Inspector. The inspection procedures included identifying and sampling suspect ACM within the pre -defined areas that were within the scope of work, submitting samples to an accredited laboratory for analysis, classifying the materials and assessing their condition, and compiling a final report detailing the inspection and the analytical results of the bulk -samples. 6.2 Sampling Procedures Statistically random bulk -samples representative of the suspect ACM of each homogeneous area were collected according to the guidelines published in the Environmental Protection Agency's October 1985 publication, "Asbestos in Building: Simplified Sampling Scheme for Friable Surfacing Materials", commonly known as the "Pink Book." City of 6 Wheat Ridge Building Division DS has collected the appropriate number of bulk -samples to meet all regulatory requirements for the classification and quantity of each homogeneous area. All reasonable efforts were made to identify homogeneous areas and to sample or assume suspect materials. Destructive investigation was conducted whenever feasible, and every effort was made to locate and quantify suspect ACM within the scope of work. Any material not identified and sampled in this report shall be assumed to be an ACM or shall be sampled by an EPA -trained and CDPHE-certified inspector and submitted for analysis. 6.3 Analytical Procedures All asbestos bulk -samples were analyzed by a third party, National Voluntary Laboratory Accreditation Program (NVLAP) accredited laboratory via Polarized Light Microscopy (PLM) for asbestos content per CDPHE Regulation 8 (see Appendix 8 for laboratory report). 7.0 Recommendations The asbestos inspection detailed in this report did not identify ACM(s); therefore, no professional abatement activities are required to remove or disturb the above -referenced sampled materials. 8.0 Asbestos Abatement & Demolition Requirements If ACM is to be removed or disturbed in a single-family residence, and the total quantity exceeds any of the regulatory trigger levels of 50 linear ft. on pipes, 32 ftZ on other surfaces, or the volume equivalent of a 55 -gallon drum, a CDPHE-certified General Abatement Contractor (GAC) is required to perform the work. The regulatory trigger levels within a commercial building are 260 linear ft. on pipes, 160 ftZ on other surfaces, or the volume equivalent of a 55 -gallon drum. In addition, formal notification to CDPHE prior to the abatement of ACM as well as air monitoring, visual inspections, and final air clearances by a CDPHE-certified Asbestos AMS is required. DS can provide the client or building owner with a proposal for project design, abatement oversight and air monitoring upon request. CDPHE regulations allow for the demolition of a building that contains non -friable asbestos -containing materials, such as caulking, mastic or resilient floor tiles. However, demolition must be completed without causing the non -friable ACM to be rendered friable. Burning a building with any ACM is prohibited. Operations such as sanding, cutting, crushing, grinding, pneumatic jacking, etc. of ACM are not permitted. Recycling of building materials such as concrete, metal, or wood that are bonded or contaminated with ACM, e.g. glue, caulking, or mastic is also prohibited. If any of the non -friable asbestos containing materials are to be recycled and rendered friable after demolition (i.e. crushing mastic -coated concrete), these materials must be abated of all ACM prior to shipping offsite for recycling. OSHA regulations regarding occupational exposure during demolition activities is still mandatory. OSHA 29 CFR 1926.1101 requires that workers performing construction -related activities be protected from asbestos fibers in excess of the permissible exposure limit of 0.1 f/cc of air. Contractors are must comply with applicable provisions of OSHA 29 CFR 1926.1101 during demolition and renovation activities. These OSHA provisions include, but are not limited to, PPE and respirators, personnel training, personal -exposure air monitoring, employee medical surveillance, wet removal methods, signage for regulated areas, etc. 7 9.0 Major & Minor Asbestos Spill Response Actions If ACM is significantly damaged and the total quantity exceeds the regulatory trigger levels, the area is deemed a "Major Asbestos Spill." The area is consequently subject to the requirements in Reg. 8, Section III.T.1. —Major Asbestos Spills, as outlined below. Additional asbestos air or dust sampling should also be conducted within the remaining areas not directly impacted by the Major Asbestos Spill to determine if asbestos -containing dust/debris has spread to adjacent areas. If asbestos fibers are found within any other areas or on building contents, they should be included in the scope of professional abatement and decontamination. The following response actions must be followed per Colorado Reg. 8 when a Major Asbestos Spill occurs: • Restrict access to the area and post warning signs to prevent entry to the area by persons other than those necessary to respond to the incident. • Shut off or temporarily modify the air handling system to prevent the distribution of asbestos fibers to other areas. • Immediately contact the Division by telephone, submit a notification in compliance with subsection III.E. (Notifications) and, if in an area of public access, apply for a permit in accordance with subsection III.G. (Permits). • Be exempted from the requirements to have a certified Supervisor on-site at all times, until such time as the immediate danger has passed. Any cleanup or asbestos abatement that must occur after the immediate danger has passed shall be supervised by a person certified by the Division. • Using certified Supervisors and certified Workers in accordance with section II. (Certification Requirements) of this Regulation, seal all openings between the contaminated and uncontaminated areas and establish negative air pressure within the contaminated area in accordance with paragraph III.J. (Air Cleaning and None -detected Pressure Requirements). This is to be accomplished using polyethylene sheeting to cover areas such as doorways, windows, elevator openings, corridor entrances, grills, drains, grates, diffusers and skylights. • HEPA vacuum or steam clean all carpets, drapes, upholstery, and other non -clothing fabrics in the contaminated area, or discard these materials. • Launder or discard contaminated clothing in accordance with subsection III.R. (Waste Handling). • HEPA vacuum or wet clean all surfaces in the contaminated area. • Discard all materials in accordance with subsection III.R. (Waste Handling). • Following completion of subparagraph III.T.1.a. through III.T.1.i. above, comply with air monitoring requirements as described in subsection III.P. (Clearing Abatement Projects); air samples shall be collected aggressively as described in 40 C.F.R. Part 763, AppendixAto Subpart E (EPA 1995), except that the air stream of the leaf blower shall not be directed at any friable ACM that remains in the area • Comply with any other measures deemed necessary by the Division to protect public health. In the event of an asbestos spill involving less than or equal to the trigger levels, the building owner or contractor should take the following non -mandatory steps: • Restrict entry to the area and post warning signs to prevent entry to the area by persons other than those necessary to respond to the incident. • Shut off or temporarily modify the air handling system to prevent the distribution of fibers to other areas in the building. • Seal all openings between the contaminated and uncontaminated areas. This is to be accomplished by using polyethylene sheeting to cover all areas such as windows, doorways, elevator openings, corridor entrances, drains, grills, grates, diffusers and skylights. City of 8 Wheat Ridge Building Division • HEPA vacuum or steam clean all carpets, draperies, upholstery and other non -clothing fabrics in the contaminated area or discard all contaminated materials in accordance with subsection III.R. (Waste Handling). • Launder or discard contaminated clothing in accordance with subsection III.R. (Waste Handling). • HEPA vacuum or wet clean all non -fabric surfaces in the contaminated area. • Following completion of subparagraphs III.T.2.a. through III.T.2.f. of Regulation 8, conduct air monitoring as described in paragraph III.P.3 of Regulation 8. (Final Clearance Air Monitoring and Sample Analyses); air samples shall be collected aggressively as described in 40 C.F.R. Part 763, Appendix A to Subpart E (EPA 1995), except that the air stream of the leaf blower shall not be directed at any friable ACM that remains in the work area. 10.0 Project Design & Project Manager Requirements DS can provide an Asbestos Abatement Project Design as well as fulfill the Colorado Asbestos Abatement Project Manager requirements for any asbestos abatement project, as applicable below. Project Design An abatement Project Design is an accurate and detailed scope of work, which includes project specifications and procedures, containment design/equipment placement, and descriptions of engineering controls and work practices for an asbestos abatement project or response action that is required by CDPHE Regulation Number 8, Part B - Asbestos (Reg. 8) on large asbestos abatement projects. Prior to the start of any asbestos abatement project in a non -school building, where the amount of asbestos -containing material (ACM) to be removed or disturbed exceeds 1,000 linear feet on pipes, or 3,000 square feet on surfaces, or in a school building in which the amount of friable ACM to be abated exceeds 3 linear feet on pipes, or 3 square feet on surfaces, a written Project Design must be developed by a State of Colorado certified Project Designer in accordance with subsection IV.G.7 of Regulation 8. A signed copy shall be posted on-site prior to commencing any abatement activities, shall be available on-site at all times, and shall remain onsite until final air clearances have been completed by a State of Colorado -certified Air Monitoring Specialist (AMS). Project Manager A Project Manager shall be used on all asbestos abatement projects in which the amount of friable asbestos - containing material to be abated exceeds 1,000 linear feet on pipes, or 3,000 square feet on other surfaces per CDPHE Regulation Number 8, Part B — Section III.6.6. An asbestos Project Manager on an abatement project shall be responsible for assessing that the project is conducted in accordance with Regulation 8, assessing that the Project Design is followed, assessing that the abatement project is cleared in accordance with Regulation 8, assessingthat the asbestos waste generated on the project is properly manifested and disposed of in accordance with Regulation 8, and communicating these assessments to the building owner or GAC. Project Managers must have proof of Colorado certification as an asbestos Project Designer and Air Monitoring Specialist in accordance with Section II of CDPHE Regulation 8 as well as a minimum of one (1) year of experience supervising, overseeing or monitoring asbestos abatement projects. A 4 -year college degree in industrial hygiene, a degree in environmental health with a major concentration in industrial hygiene, or the possession of a certified industrial hygienist (CIH) certificate given by the American Board of Industrial Hygiene (ABIH) may be substituted for the Colorado asbestos Air Monitoring Specialist certification. City of Wheat Ridge 9 Building Division The GAC shall notify the building owner during the bid process as to whether a Project Manager is required. Project Managers shall be independent of the asbestos abatement contractor and work strictly on behalf of the building owner to the extent feasible unless the abatement is being performed in-house. Project Managers must sign the original copy of the abatement permit for the permit to be valid, and before any abatement can take place. 11.0 Disclaimer & Limitations The activities outlined in this report were conducted in a manner consistent with a level of care and expertise exercised by members of the environmental consulting and industrial hygiene profession. All activities were performed in accordance with all applicable federal, state, and local regulations as well as generally accepted standards and professional practice. No warranty is either expressed or implied. DS assumes no responsibility or liability for error in public information utilized, statements from sources other than DS, or developments resulting from situations outside the scope of work for this project. The details provided within this report outline the inspection activities on the date(s) indicated and should not be relied upon to represent conditions at a later date. The laboratory results contained in this report apply specifically to the materials in which bulk -samples were collected. The results do not include or apply to any other materials within the structure that were not sampled but may contain asbestos; including materials that may be hidden or inaccessible. Additional inspection and bulk -sampling activities by a certified inspector would be required to determine whether any other materials contain asbestos. This report has been prepared on behalf of and exclusively for use by the DS's client, with specific application to their project as discussed in the scope of work. The information contained in this report is intended as supplementary material for abatement design and is not to be used as the sole means to develop the scope of abatement activities, bidding or billing purposes. Contractors or consultants reviewing this report must draw their own conclusions regarding further investigation or remediation deemed necessary. DS can provide a full scope of work for abatement upon request. DS does not warrant the work of regulatory agencies, laboratories or other third parties supplying information which may have been used in the preparation of this report. 12.0 Copyright Notice © DS Environmental 2020. All Rights Reserved. This document contains material protected under Federal Copyright Laws. No part of this document or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author and DS Environmental. City of Wheat Ridge 10 Building Division APPENDIX A: CERTIFICATIONS City of Wheat Ridge 11 Building Division City of Wheat Ridge 12 Building Division City of Wheat Ridge 13 Building Division AERObioloci LAboRATORy ASSOCIATES, INCORPORATED Expertise Since 1997 Certificate of Analysis 780 Simms Street Suite 104 Golden, CO, 80401 303.232.3746 www.aerobiology.net Client Name DS Environmental Consulting(F) ° Date Collected: 10/19/2020 Street Address 7555 W. 10th Ave, Suite A Date Received: 10/19/2020 City, State ZIP Lakewood, CO 80214 TESTING Date Analyzed: 10/20/2020 Attn: Zack Westfall NVLAP Lab Code 200860-0 Date Reported: 10/20/2020 Client Project Name: 4660 Quay St., Wheat Ridge, CO Project ID: 20044501 Test Requested: 3002, Asbestos in Bulk Samples Method: EPA 600/R-93/116: Method for Asbestos in Bulk Building Materials, EPA -- 40 CFR Appendix E to Subpart E of Part 763, Interim Method for Asbestos in Bulk Insulation Samples Sample Identification Physical Description of Sample/Layer Homo- geneous (Y� Layer Percentage Asbestos Detected Asbestos Percentage Non -Asbestos Fiber Percentage Non -Fibrous Material Percentage Matrix Material Composition Client Lab Sample Number FTI -1 20044501-1A Beige Floor Tile N 90 ND 100 BIC 20044501-1B Yellow Mastic N 2 ND 100 B 20044501-1C White Compound N 8 ND 100 CIG FTI -2 20044501-2A Beige Floor Tile N 95 ND 100 BIC 20044501-2B Yellow Mastic N 2 ND 100 B 20044501-2C White Compound N 3 ND 100 CIG CTI -1 20044501-3 White/Brown Ceiling Tile N 100 ND 85 CELL 15 CTI -2 20044501-4 White/Brown Ceiling Tile N 100 ND 85 CELL 15 An&aa B RMM Laboratory rna13,st Page 1 of 2 Shannon Whitmore A a'ba_ toa Lab Supanlaor AC = Actinolite AM = Amositt A ,• A nthnphvllite AH = _1nim21 Hair ALL = Carse F0 s F:6W.ow Glass B = Bing C = Arita D Ttofeis CHRY W cluviatile AIW m 24lizmr31'MT4coal G a Gtip&uen CR E Cr1M-2&l,t# GT m Oth#r M 0 hfir- MNJ + Trym#Lit.* ; SYN ■ Sy0th*ted 01? Qr ifti-C Tr + T!racq TL nk Tak C)P sg44; ND = Dont Det4KC i4 IV = W'vELaatvrait# P ='pr. Like Q = Quartz T=TM V _ Vesmictil to City of Wheat Ridge Building Division AERObIOlOGy LAbORATORy 780 Sunnis Street ASSOCIATES INCORPORATED Suite Golden, � Golden, CO. 804401 Expertise Since 1 9 997 3bolog.3746 p Certificate of Analysis www aerobiology net Client Name DS Environmental Consulting�r �� n® Date Collected: 10/19/2020 Street Address 7555 W. 10th Ave, Suite A v LJ� I Date Received: 10/19/2020 City, State ZIP Lakewood, CO 80214 TESTING V Date Analyzed: 10/20/2020 Attn: Zack Westfall NVLAP Lab Code 200860-0 Date Reported: 10/20/2020 Client Project Name: 4660 Quay St., Wheat Ridge, CO Project ID: 20044501 Test Requested: 3002, Asbestos in Bulk Samples Method: EPA 600/R-93/116: Method for Asbestos in Bulk Building Materials, EPA -- 40 CFR Appendix E to Subpart E of Part 763, Interim Method for Asbestos in Bulk Insulation Samples General Notes • ND indicates no asbestos was detected; the method detection limit is 1 %. • Trace or "< 1" indicates asbestos was identified in the sample, but the concentration is less than 1% and cannot be quantified without point counting. • Samples identified as inhomogeneous (more than one layer) are separated into individual layers, and each layer is analyzed and reported separately. 11 All regulated asbestos minerals (i.e. chrysotile, amosite, crocidolite, anthophyllite, tremolite, and actinolite) were sought in every layer of each sample, but only those asbestos minerals detected are listed. Amosite is the common name for the asbestiform variety of the mineral grunerite. Crocidolite is the common name used for the asbestiform variety of the mineral riebeckite. • Tile, vinyl, foam, plastic, and fine powder samples may contain asbestos fibers of such small diameter (< 0.25 microns in diameter) that these fibers cannot be detected by PLM. For such samples, more sensitive analytical methods (e.g. TEM, SEM, and XRD) are recommended if greater certainty about asbestos content is required. Semi -quantitative bulk TEM floor tile analysis is accepted under NESHAP regulations. • These results are submitted pursuant to Aerobiology Laboratory Associates, Inc.'s current terms and conditions of sale, including the company's standard warranty and limitation of liability provisions. No responsibility or liability is assumed for the manner in which the results are used or interpreted. • Unless notified in writing to return the samples covered by this report, Aerobiology Laboratory Associates, Inc. will store the samples for a minimum period of thirty (30) days before discarding. A shipping and handling charge will be assessed for the return of any samples. • Aerobiology does not guarantee the results of tape lifts, microvacs, wipe, and/or debris samples. Accurate analysis cannot be performed due to particle size, media used, and/or amount of material given. Analysis of these materials should be preformed by a TEM. A result of ND does not indicate that the sample area does not contain ashestos. It means the analyst could not identify ashestos in the specific sample for the reasons listed above. Notes Required by NVLAP • This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. • This test report relates only to the items tested or calibrated. • This report is not valid unless it bears the name of a NVLAP-approved signatory. • Any reproduction of this document must include the entire document in order for the report to be valid. City of Wheat Ridge Page 2 of 2 Building Division ON SITE PLANS MUST BE ON SITE FON INSPECTION au Mulam are liddhashandlions smoke alarms wall comply with section 316 of 2013 IRC Smoke alarms shall be installed in the following locations'. In each sleeping room. Outside each separate sleeping area In the Immediate vicinity of the hedro On each additional atony ofthe dwelling, including beaements end habitable aims and not Including crawl spaces and uninhabitable atticsIn dwellings or dwelling units with spec levels and withoutan intervening do" between the adjacent levela amok¢ alarm installed on the upper level shall Bug" for the adjacent lower level provided that the lower level is less than one full story helow the upper level. When more than one smoke alarm is required to be Installed within an individual dwelling unit the alarm devices shall be interconnected thesuch a manner that the actuation of one alarm will activate all of alarms In the individual unit. carbon monoxide alarms shall be installed within 16 fact of each sleeping room APPROVED Resew etl Mr Cnae Compares BRANDON F 10/13/2020 Pans Examiner Dare Mme. .,...rw.. .aa.w� . arw..rwww aa+e.wwemw ALL WORK SHALL COMPLY WITH 2018 IRC, 2018 IECCI 2020 NEC, COLORADO PLUMBING CODE Frx SDe�pot floorplanner refer to structural pages for wall removed Fm SD export floorplanner LOO � Wheat Ridge Notes GENERAL STRUCTURAL NOTES PRIORTOTHE [OMMENCEMENTOF ANY WORKS, THE BUILDER ISM CHECK AND/OR DETERMINE ALL CONSTRUCTION DETAILS, All work shall conform to the 2018 editions of the IRC and IBC as adopted b the Cit of Wheat Ridge, CO. NOTE: p Y Y g INCLUDING CHECKING EKISTING SITE UWEIS AND DIMENSIONS. THE DRAWING LS TO BE READ IN CONJUNCTION WITH ALL OTHER PR ECT DRAWINGS, CONSTRUCTION NOTE AND/OR PROJECTSPECIFICATION. ALL DISCREPANCIES SHOULD BE REPORTED ONLY (2) 1.75"x9.25" LVL T-9" t 11'-0" BEAM CLEAR SPAN 3'-9" 1'-0" NOTE: IMMEDIATELY. Design Loads: NEED TO CONTINUE WEST Design loads the 2018 IRC 2018 IBC OF THIS MONOPOST ONLY (2) 1.75"x9.25" LVL per are and unless noted otherwise: g p NEED TO CONTINUE EAST EXISTING) 2X10 • Roof Dead Load: 15 psf JOISTS@ 16" O.C. OF THIS MONOPOST • Snow Ground: 30 psf EXISTING 2x4 STUD ALL EXISTING 2x4 STUD WALL W/ 4" TALL CURBS FE ­4W/ 4" TALL CURB STEM • Snow Roof: 30 psf FOO INFOOTING -°� r �szw L • Floor Dead Load: 10 psf • Floor Live Load: 40 psf NEW (3) 1.75"x9.25" LVL BEAM • Wall Dead Load: 10 psf . ENGINEERING AND INSPECTIOV, • Attic Live Load: 10 psf • Wind Speed (Vult)' 135 mph, Exposure C NOTE: BEAM IS PERMITTED TO BE I j EW 2x4 KING TU • Seismic: Category B SPLICED AT MONOPOST I I NEW (3) 2x4 TR IMM ER STUDS 0 LIOFN LOCATION. ENSURE 2" MIN. I I W/ 2x4 BLOCKI 4G ON TOP OF EMOVE 3'-10jq" �9,N9 NEW 2x4 KING STUD 1 2'-3" I"' TRIMMERS BEARING FOR EACH BEAM END Structural Erection, Bracing, and Observation: NEW (3) 2x4 TRIMMER STUDS I EXISTING I F EXISTING •••••• \ •.• • S • A. •• � REMOVE 7'-10Y4" —4 I ALL V � �( ti! � OPENING • The structural drawings are intended to show the general character the extent of the project and are not SIMPSON MSTA21 OF EXISTING WALL ;•+1 k i intended to show all details of the work. All dimensions shown on drawings are approximate. I IKID NEW (4) 2x4 TRIMMER STUDS I I ; Q 53807`N • The SER is responsible for the strength and stability of the primary structure in its completed form. If Structure is W/ 2x4 BLOCKING ON TOP OF I I not built in accordance with structural plans, structural engineer is not liable for any failures which may occur after TRIMMERS I I i structure is built. EXISTING 4" SLAB I I•• ryi •� •'• • The Contractor is responsible for coordinating details and accuracy of the work; for conforming and correlating all I I I I OF •' `J�' l.' Fss/ONZ quantities and dimensions; for selecting fabrication processes; for techniques of the assembly; and for performing work in E� a safe and secure manner; and all inspection necessary. • The Contractor is responsible for the means and methods of construction and all job-related safety standards 2x4 WALL FRAMING such as OSHA and DOSH (Department of Occupational Safety and Health). Contractor is responsible to adhere to OSHA USE TREATED LUMBER ,� ,�. (3) #4 REBAR 2'-1" REMOVE EXISTING FOUNDATION 2'-5" 1'-3" Ashley Mendel/ 2020.1 0.02 regulations regarding steel erection items specifically addressed in the latest OSHA regulations. Bolting and field welding FOR BOTTOM PLATE, TYP. TO INSTALL NEW SQUARE at all member connections is to be completed prior to release of the member from the hoisting mechanism unless FOUNDATION PAD, TYPICAL P.F 1 d•fl •77-Q6'��' reviewed and approved by the General Contractor's temporary bracing and shoring design engineer. Foundations: 1 WALL OPENING ELEVATION VIEW - PLAN NORTH • Foundations are designed without an engineer's soil report. The foundation design criteria below were assumed for purposes of foundation design and shall be confirmed by a soils engineer, at Owner's expense, prior to construction. S-0 SCALD 1/4'=1'-0'(This procedure may require revisions to the foundation design, at additional expense to the Owner, if soils engineer determines that such design criteria are inappropriate for this building site.) • Design bearing pressures for footings are as follows:o Maximum design soil pressure: 1500 psf• 01E31u11dingDWhM o Minimum dead load design soil pressure: 500 psf o Footings shall be placed on undisturbed natural soil or compacted fill tested and approved by soils engineer. • All slabs on grade shall be separated from adjacent structural and finish elements to allow free movement of the slab, unless specifically shown and noted otherwise. Concrete and Reinforcement: • Concrete shall conform to applicable provisions of ACI 301 and 318. • Minimum 28-day compressive strength (f'c) of all concrete shall be 3,000 psi. All cement shall be Typed 1/II. 1�' DIA. X q' LONG A572, GRADE 60 THREADED ROD • All deformed reinforcement shall be ASTM 615 grade 60. Reinforcement shall be fabricated and placed per ACI 1 10.02.20 Level Engineering Revisions Manual of Standard Practice (ACI 315). ,yq OLEs FORT. DIA. EXPANSION '� ANCHOR d' MAX. DIAMETER) • Minimum concrete cover over reinforcing shall be 1-1/2" for concrete placed against forms or 3" for concrete No. Date Revisions placed against earth. _ • Keep reinforcement clean and free of dirt, oil, scale. Oil forms prior to placing reinforcement. i T + ADJ. STEEL PIPE COL. (SEE PLAN FOR SIZE & TYPE) Wood Framing: 3" ADJ. STEEL • All framing and details not specifically specified shall comply with the prescriptive (non-engineered) q PIPE COLUMN Z0 ROVIDE BASE PL. J"X7"X7" SET ON requirements of the International Residential Code. LEVEL SURFACE AND GROUT UNDER • Sawn Lumber and Timbers: PL. @ SURFACE IRREGULARITIES, clleRL o Nominal 2x, 3x, and 4x dimension lumber shall be Hem-Fir, Grade No. 2 except as noted below: (SEE PLAN FOR FND. SIZE & THK.) WRAP PIPE COL. W/ BASE PL. TO BE WELDED TO PIPE JUDITH ASEM 0 2x4 and 2x6 studs <9'-0" length maybe Hem-Fir Stud Grade. EXPANSION MAT'L FULL COLUMN. • Engineered Wood: DEPTH OF CONCRETE 4JobRI• 4660 QUAY STREET o Laminated Veneer Lumber (LVL): Manufactured 1-3/4" wide Microllams ML b i-Level ore equivalent with FASTEN BASE PLATE CONCRETE PAD ( ) ( ) Y q 4" CONCRETE SLAB FOOTING WITH (2) -}" DIA. EXPANSION Fb=2,600 psi, E=1,900,00 psi, Fv=285 psi. ON GRADE ANCHOR W/4" MIN. EMBEDMENT WHEAT RIDGE, CO 80033 • Wall and Floor Framing: o All wall studs shall be continuous from floor to floor or from floor to roof, unless noted otherwise. o All built-up stud columns, nail all laminations with 16d @ 12" full height, staggered. DD o At dropped wood beams bearing on built-up studs, bear beams on stud end grain. Form a pocket by q tr 9 nom. (4) #4 REBA @ Be O.C. E.W. BOT. _ _ _ extending king studs to the wall top plate on each side of the beam, unless noted otherwise. Nail king studs to UNLESS NOTED — — ` Drawing Title beam with at least (6) 16d nails each side, unless noted otherwise. --- OTHERWISE VARIES- GENERAL NOTES Wood Framing: Hardware, Connectors, and Fasteners: SEE ELEVATION WALL OPENING ELEVATION WEST • Metal connectors shall be Simpson Strong Tie and installed with nailing to achieve maximum rated capacity, 2 COLUMN DETAIL SECTION DETAILS unless noted otherwise. • All screws, nails, and bolts shall match material and coating of hangers and other connectors. DO NOT mix — stainless with galvanized products. ! • Fasteners: v�v,tie,Tbw�rcu," � o Framing nails in 2x lumber shall be 12d common nails (0.131" diameter x 3 Ya" long), unless noted otherwise. ' �, scale N/A JOB #6972 DBL, 9.16.20 DfeWn'Y AMANDA FYOCK These nails are commonly referred to as "short sixteens" or "16d gun nails". Nails called out as "16d" on plan shall be 12d common nails, unless noted otherwise. PROPOSED WORK -i Drawing No. Revision IT ATN]W S-0 1 R Fc '?DO NOT POUR FLOOR. UNTIL ABOVE HAS BEEN SIGNED ROUGHS ♦ i CITY OF WHEAT RIDGE Building Inspection Division (303) 234 -5933 Inspection line (303) 235 -2855 Office • (303) 235 -2857 Fax INSPECTION NOTICE Inspection Type: �y4-Z A, ng/` Job Address: W ,o &�un41 S7" Permit Number: C'5Pb fs _ ❑ No one available for inspection: Time ! AM /PM Re- Inspection required: Yes - When corrections have been made, call for re- inspection at 303 - 234 -5933 Date: r Inspector. DO NOT REMOVE THIS NOTICE ♦ i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 235-2857 Fax INSPECTION NOTICE Inspection Type: Fs v -Z Job Address: &tt v _4 ° Permit Number: C'5O fs F° ter ~t c.~r ❑ No one available for inspection: Time : f AM/PM Re-Inspection required: Yes *When corrections have been made, call for re-inspection at 303-234-5933 Date: Z D Inspector: f DO NOT REMOVE THIS NOTICE h ♦ i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 235-2857 Fax INSPECTION NOTICE Inspection Type: Job Address: 466 fu? a Permit Number: Ot-7C 213 nr" pp c I No one available for inspection: Time /?T AM M t Re-Inspection required: es No When corrections have been made, call t~ insp cti/onneat 303-234-5933 Date: 7XV)~ Inspector: r , G DO NOT REMOVE THIS NOTICE 41 CITY OF WHEAT RIDGE Building Inspection Division / (303) 234-5933 Inspection line (303) 235-2855 Office (303) 235-2857 Fax INSPECTION NOTICE Inspection Type: Job Address/Permit Number: C.f 11 i~~ f g, rr I ❑ No one available for inspection: Time AM/PM Re-Inspection required: No When corrections have been made, call for re-inspection at 303-234-5933 Date: 7 ` `a i Inspector: .f 2s DO NOT REMOVE THIS NOTICE E ♦ i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 235-2857 Fax INSPECTION NOTICE Inspection Type: a, j f^e,~, 41) Job Address: 614411_2 Permit Number: L e.5r_p ❑ No one available for inspection: Time AM/PM Re-Inspection required: Yes 60 "When corrections have been made, calf for re-inspection at 303-234-5933 Date: Inspector: f DO NOT REMOVE THIS NOTICE of NHE?rp City of Wheat Ridge Building Division 7500 W. 29th Ave., Wheat Ridge, CO 80033 Office: 303-235-2855 * Fax: 303-235-2857 c o Inspection Line: 303-234-5933 O<ORPO Date: Plan D$-9 Building Permit Application Property Address: 4~60 Property Owner (please print): \ Q i c 2 Phone: 3a5 ~yZl-73v Mailing Address: (if different than property address) Address: & ~0 City State Zip: Loki p Contractor: t T G~f Pa-r Se-.,rJ i ce S Contractor License#: OIR39-3 Phone: S`ub Contractors: Electrical City License Plumbing City License Mechanical City License Company. Company Company: Exp. Date: Exp. Date: Exp. Date: Approval r Approval: Approval: Use of space (description): Construction Value: $ Description of work., (as calculated per the Building Valuation Data sheet) 11 P' Plan Review (due at time of submittal): $ J 3C9 Sq. Ft./L.Ft added: Squares ZZ BTU's Gallons Amps OWNERICONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT I hereby certify that the setback distances proposed by this permit application are accurate, and do not violate applicable ordinances, rules or regulations of the City of Wheat Ridge or covenants, easements or restrictions of record; that all measurements shown, and allegations made are accurate; that I have read and agree to abide by all conditions printed on this application and that I assume full responsibility for compliance with the Wheat Ridge Building Code (I.B.C) and all other applicable Wheat Ridge Ordinances, for work under this permit. Plans subject to field inspection. CIRLCE ONE:: (OWNER) (CONTRACTOR) or PERSONAL REPRESENTATIVE of (OWNER) (CONTRATOR) PRINT NAME'Y - ~7~_ - - j I u SIGNATURE: \C ~ Date: - - - Bldg Valuation: $ 7 DEPARTMENT OF PLANNING AND DEVELOPMENT Building Permit Number : 11541 BUILDING INSPECTION LINE - 303-234-5933 Date : 11/27/2000 CITY OF WHEAT RIDGE 7500 WEST 29TH AVENUE WHEAT RIDGE, CO 80215 - (303-235-2855) Property Owner : Property Address : 4660 QUAY ST Phone : 421-6730 Contractor License No. : 17835 Company : Blue Sky Piumbing Phone : 421 2161 OWNER/CONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT I hereby certify that the setback distances proposed by this permit application are accurate, and do not violate applicable ordinances, rules or regulations of the City of Wheat Ridge or covenants, easements or restrictions of record; that all measurements shown, and allegations made are accurete; that I have read and ayree to abide by all conditions printed on this application, and that I assume full responsibiliry for wmpliance with the Wheat Ridge Building Code (U.B.C.) and all other applicable Wheat Ridge ordinances, for work under this permit. (OWNER)(CONTRACTOR) SIGNED DATE Description : 40 GALLON HOT WATER HEATER Construction Value : Permit Fee : Plan Review Fee : Use Tax : Total $23.50 $0.00 $7.13 $30.63 Use: Electrical License No : Company : Expiration Date : Approval: Plumbing License No : Company: Expiration Date : Approval: Mechanical License No : Company : Expiration Date : Approval: (t) This permit was issuetl in accortlance with Me provisions set forth in yopur application and is sub1~ect lo the laws of the State of Colo2do antl to the Zoning Regulations and Buildin~ Code of Wheat Ritlge, Colorado or any Mher applicaEle ordinances W the Ciry. (2) This permit shall racpire if (A) the vrork authorized is not commenced within sixty (80) days from issue tlale or (B) the building authorizetl is suspended or abandonetl for a penotl of 120 days. (3) if this permit racpires, a new pertnit may be acquire0 for a fee of one-half me amount noimaly require4 providetl no changes have been or will be made in the origlnal plans antl speGfiwtlons antl any suspension or aCandonment has not exceetletl one (7) year. If changes are made a tt suspension or abantlonment exceetls one (1) year, full fees shall be paid for a new permk. (4) No work oT any menner shall be tlone that will change the naNral flow of water causing a tlrainage problem. (5) COnVactor shall notiy the Building Inspectar twenly-four (24) hours in advance for all inspeciions and shall receive written approval on inspection card before ceetliing with successive phases of the Iob. (e) puance of a pertnit or the approval of tlrewings and specifications shall not be conshued lo Oe a permit for, nor an approval of, any violation of the provisions 2uilding cody,s or any other oMmance, law, rule or regulation. DEPARTMENT OF PLANNING AND 6FVELOPMENT BUILDING INSPECTION LINE - 303-234-5933 CITY OF WHEAT RIDGE 7500 WEST 29TH AVENUE WHEAT RIDGE, CO 80215 - (303-235-2855) Building Permit Nurree- Date PropertyOwner: QN-c- ~ Property Address Cantrecror License No. : ii,_l ~ 3 S Company : ' VS-3\, ,..5 S(L I\v ~ . . _ OWNER/CONTRACTOR SIGNATURE OF UNDERSTANDING AAD AGREEMENT I hereby certify that the setback dishnces proposed by this permit application are accurete, and tlo not violate applicable ordinances, rules or regulations ot the Ciry of Wheat Ridge or covenants, easements or restnctions of rcwrd: that all measurements shown, and allegations made are accurate: that I have rcad and agree toabide by all conditions printed on this aaplieation, and that I assume full responsibility for compliance with the Wheat Ridge Building Code (U.B.C.) and all other applicable Wheat Ridge ordinances, forwork under this pertnit. (OWNER)(CONTRACTOR) SIGNED DATE USB : Description : ction Value : Permit Fee : Use Tax : Total : -36 % w k_~ h..\ ZSfi p..---►~~i•~ Approval : Zoning : B'uifHirTB=Si rc'St3 Approval: P c. - - Approval Occupancy : Walis 1 -1 41 . r-iwnuniy ucense rvo: - ` ` nnecnarncal License iVo : Company : Company :~U~...t SK~.. Company : \ Expiretion Date : Expiration Date : Expiretion Date : Approval : Approvai : Approval : (1) This Oermit wes uwatl In aaorCanee wMh Ua proNSiona aet MM in yopur applinUOn aM is sub1ed to the laws of the Sbte of Coloraeo antl ta the Zomng Regulations antl Builtling CoEe o! VJheat Ritlqe, Coloratlo or any oNer aODlimble orEinancss of the Ciry. (2) This pertnit ehalhexpire if (A) the vrork 8uthonxe0 n not mmmenWE wiNin sixry (60) Cays hom issue Cata or (8) the bullEing auNOnzeE is suspenaM or abantloneC for a penoE of 720 days. (3) I( U1i5 DGfB1if 6YpifRy i iteW pprtnR 111ay be iCpUiflE Mf i ke of Ontrhalt the emOUN nortnally repuireE. provi0etl no Uanges have been or will be matle in tlx oriqinal plans antl spstiflntlons anC arry swpensian or aDantlonment has not exceeEetl one (t) year. If Uhanges are matle or if suspension ar aban0onmmt exeelES one (1) year, lull (ees shall ba paW lor a new petmit (4) No vrork of arry mannar ahall Ee Eona Nat will chanqa the natural Ilow ol water eausiny a tlralnags pmDlem. (5) Contrattpt fhall nOtlfy the Building' Inspxbr lwenry•four (Y<) houn in adwnce lor all inspxtlons md shall receive wtitten aDProval on ins0ecfion nre xrorc praeaetliinq wiN suansive Ohases o1 Me'oh. (6) The i3SWnte of a pertnit ar the apD~l ~dmvings anE speufintlona shall not Ce construM ro Oe a Oemril Por, nor an approval ot, any violation of Ne provisions ot the buil0ing mEes or arry oNer ortlinanca, law, rule m regulaUan. v kN BUILDING DEPARTMENT USE ONLY Phane: Phone : -A 7 ; SIC : Sq. Ft. : Roof: Stories : Residential Units : QhlCf Btlilding InSpector -.~EPARTMENT OP PLANNING AND DEVItLOPMENT Building Permit Number : 7341 ~ ~BUILDING INSPECTION DIVISION - 235-2855 CITY OF WHEAT RIDGE Date : 6/25/98 7500 WEST 29TH AVENUE WHEAT RIDGE, CO 80215 Property Owner : Property Address : 4660 Quay Street Phone : 421-6730 Contractor License No. : 18057 Company : Modelco Electric Phone : 451 6236 OWNEWCONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT 1hereby certiy that the aetback distances proposed by this pertnit application are accurete, and do not violate ap licabb ordinances, mles or regulations of the City of Wheat Ridge or covenants; eaaeme~ or restrictions of record; that all measurements ahown, and albgattons madeare axurate; that I havo read and agree to abide b ell condkionspn nted on this appAcation, amd that1 assume full re~onsibilttfr for comance with the Wheal Ridge Building Code (U.B.C.) and all other applicabb Wheat Fiidge ordmances, for xrork under this permR. . (OWNER)(CONTRACTOR) SIGNED DATE use : Description : AIC Hook-up i APProval : Zoning : Approval : Approval : Occupancy : Walls : Roof Electrical License No : Company : BUILDING DEPARTMENT USE ONLY Plumbing License No : Company : Construction Value : Permit Fee : Plan Review Fee,.> Use Tax: Total $25.00 $0.00 $3.00 $28.00 SIC Sq. Ft. : Stories : Residential Units : Mechanical License No : Company : Expiration Date : Expiration Date : Expiration Date : Approval: Approval: Approval: (t) This pemwt was isaued'm accord8nee wNh the provisiona ael torth in yopur appliealion antl 4 subieU to the Iswa W theStata of Colorado end to the Zoninp . Regulallorra anM BulldNq Code d~Mieat R'Wge~ Cdaetlo or any ottrer applkable adinancea W the Ciry. (2) Thls pattnR shall expire fl(/) the vrork euNOr(ze0 la nol commencetl within aucry (80) tlaya 1rom isaue tlate w(B) the bulltlirq auMOrizetl is SuapendeC or . abantlOnaA tol' e Periad Of 120 s. (3) If this permit e~cpiree, a ~rew may be acquitetl fw a tae W ono-half the amouirt nwmalty reqWred, pmvMed no charpes have bean ar wili ba matle in the original plane and apeeiflea ~tl eny sunpensim M abanCOnmem has not ezceedetl orre (1) year. If cherqes ere metle or II wspensbn w abandonrtbnt ezceeda one (r) resr, tue tees .neAl ee peta for a new aennit. (4 No worlc of arry mBnrrer 6hell De tloire thal wIN changs the naNrel Ilow of water causing a Aialnage pmbbm. (5;. ContraQw shall notify Ure BWldinq.lnsoectar lwenty-four (24) houre in aOVancalor all inspectbns and shall receive wAtten appmval an inapection eaid before r~ceediing wHh succeesive phaaee oi tl» iob. (6) Pme ieeuar~ce a e penna a ~he ~ove~ oraFSwinas and sPedncaaom snan not be wnsoved ro ne a Pamrt ro., mr ao apxwai a, any woiaeon a the Provisions of 0>7builWnp cotles a vry dMr ordinance, law, rule a regWatlon. THIS PERMIT VALID ONLY WHEN SIGNED BY THE CHIEF BUILDING INSPECTOR AND MAYOR CALL: 234.5933 24 HOURS PRIOR TO INSPECTION DEPARTMENT OF PLANNING AND DEVELOPMENT BUILDING INSPECTION DIVISION - 235-2855 CITY OF WHEAT RIDGE 7500 WEST 29TH AVENUE WHEAT RIDGE, CO 80215 Property Owner Property Address Contractor License No. Company : Building Permit Number : Date : /J _25 A6 ~E~ 1~v57 OWNER/CONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT I hereby certify that the setback distances proposed by this pertnil application are accurate, and do not violate applicable ordinances, rules or regulations of the City of Wheat Ridge or covenants, easements or restrictions of record; that all measurements shown, and allegations made are accurate; that I have read and agree t e by all conditions printed on this application, and that I assume (ull responsibili r ompli with the Wheat Ridge Building Code (U,B.C.) and all other applica6le Whe d or ' s, tor work under this pertni= (OWNER)(CONTRACTOR) SIGNED DATE t) /7- Description Approval : Zoning : BulldiEgM'oTffffeftts"`~ Approval: Patilic~WbT Approval : Occupancy : Walls Electrical License No : Company : BUILDIN Roof Plumbing License No : Company : Use Tax : Total : SIC : Sq. Ft. : Phone : q_,z~ - 6 73 0 Pnane: q S/ ~2 3;6 Residential Units : Mechanical License No : Company : Expiration Date : Expiration Date : Expiration Date : Approval : Approval : Approval : ig ,,Igl%~RiMmFea~l IN (t) This pertnit was Issued In aaaNance with the provisions sel torth in yopur appliolbn and Is sublecl lo the Wws of tlx Slalo of Colondo antl to the Zoning Regulations and Building CoOe ol Nfieal Ridge. Coloratlo or any olher applicaEle ortlinar~ces of the Ciry. (2) 7T1s permil shall ezpire d(A) Ihe work authonzeE is nol commenud wiUin siaiy (80) Gays from issue dale or (B) the CuilCing aulhaizeA is suspen0ed or abanEOneE for a period o1120 Cays. (J) If tnis pertnit ezpires, a new permit may Oe acQUired br a fee o/ one-twif the amount normaly repuired. provided no Uanges have Eeen or vnll be made in the original plans anE speciGfalionz anE any suspenslon or abandonmenl has wl exceeded one (1) year. II changes are maCe at it suspensbn or a0andonment e:ceeds one (1) year, lull fees shall be paitl tor a new permil. (a) No work of any manner shall be tlone that will change the nalural flav ol waler causing a drainage proDlem. (5) Conlrador shall noGy the Building Inspec1or twenN-four (24) houts in atlva~x2 bt all inspecibns anC shall receive wntlen approval on inspetlion rard bebre proceediing with successive pnases of Ue'ob. (6) The issuance of a permil or the apProval o~drawings anC specifiwtians shall rrol be consWed to be a permil for, nor an aOProval 01, afry vialaGOn ol the Drovisions o( the building codes or any olher oNinance, law, rule or regula0on. Chief Building Inspector For Mayor THIS PERMIT VALID ONLY WHEN SIGNED BY THE CNIEF BUILDING INSPECTOR AND MAYOR CALL: 234-5933 24 HOURS PRIOR TO INSPECTION Construction Value : Permit Fee : Plan Review Fee : USE ONLY Stories