Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
3622 Garland Street
Inspection Type: Job Address: Permit Number: CITY OF WHEAT RIDGE Building Inspection Division (303) 235-2855 Office P ©IO NOT ali ❑ No one available for ins V,:ec 'on: Re -Inspection require 11 No When corrections have been made, sch d http✓Avww.ci. wheatridge.co. uslinspedtio Date.;? -q- spe to. for re -inspection online at: f i CITY OF WHEAT RIDGE Building Inspection Division (303) 235-2855 Office INSPECTION NOTICE 'T I (-'- Inspection Type: tom' -5 Job Address: 7_2__C; 19 Permit Number:. e available for inspection: Re -Inspection requi When corrections have been http://www.ci. wheatridge. co. u Dat , - Ins AM/PM for re -inspection online at: PERMIT NO: JOB ADDRESS: JOB DESCRIPTION: City of Wheat Ridge Residential Solar PERMIT - 202000230 202000230 3622 Garland St Installation of utility no structural required. ISSUED: 02/06/2020 EXPIRES: 02/05/2021 interactive PV solar system, 511.895 kW, roof top, *** CONTACTS *** OWNER (303)638-7168 CARD JOEF SUB (385)482-0045 LEE HATLEY 180271 BRS FIELD OPS, LLC *** PARCEL INFO *** ZONE CODE: UA / Unassigned USE: UA / Unassigned SUBDIVISION CODE: 2406 / BEL AIRE,HILLCREST HEIGHTS, ME BLOCK/LOT#: 0 / *** FEE SUMMARY *** ESTIMATED PROJECT VALUATION: 16,000.00 FEES Total Valuation 0.00 Residential Solar 500.00 ** TOTAL ** 500.00 *** COMMENTS *** *** CONDITIONS *** Approved per plans and red -line notes on plans. Must comply with 2012 IRC, 2017 NEC and all applicable City of Wheat Ridge Municipal Codes. Work is subject to field inspections. I, by my signature, do hereby attest that the work to be performed shall comply with all accompanyingg approved plans and specifications, applicable building codes, and all applicable municipal codes, policies and procedures, and that I ain the legal owner or have been authorized by the legal owner of the property and am authorized to obtain this permit and perform the work described and approved in conjunction with thiserrrpf. I further attest that I am legally authorized to include all entities named within this document as parties to the work to be perfornd ander ta1Uvnrlc to beperfod/ormed is disclosed in this document an'ts' , ccompan i�ng approved plans and specifications. Signature of OWNER or CONTRAC'T'OR (Circle one) Date I. This permit was issued based on the information provided in the permit application and accompanying plans and specifications and is subject to the compliance with those documents, and all applicable statutes, ordinances, regulations, policies and procedures. 2. This permit shall expire 365 days after the date of issuance regardless of activity. Requests for extension must be made in writing and received prior to the date of expiration. An extension of no more than 180 days made be granted at the discretion of the Chief Building Official and may be subject to a fee equal to one-half of the originalpermit fee. 3, If this permit expires, a new permit may be required to be obtained. Issuance of a new permit shall be subject to the standard requirements, fees androcedures for approval of any new permit. Re -issuance or extension of expired permits is at the sole discretion of the Chief Building Official and is not guaranteed. 4, No work of any manner shall be performed that shall results in a change of the natural flow of water without prior andspecific approval. 5- The permit holder shall notify the Building and Inspection Services DIvision in accordance with established policy of all required inspections and shall not proceed or conceal work without written approval of such work from the Building and Inspection Services Division. 6. The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any provision of any applicable code or any ordinance or rulation of this jurisdiction. Approval of work is subject to field inspection. Signature of Chief Building Official Date REQUESTS MUST BE MADE BY 11:59PM ANY BUSINESS DAY FOR INSPECTION THE FOLLOWING BUSINESS DAY. City of �mumj-ylh6ati`dg,e DEVELOPMENT Building & Inspection Services 7500 W. 2911 Ave., Wheat Ridge, CO 80033 Office: 303-235-2855 " Fax: 303-237-8929 Inspection Line: 303-234-5933 Email: permits(c-_)ci.wheatridqe.co.us I FOR OFFICE USE ONLY I Date: oo Plan/Permit # Plan Review Fee: Building Permit Application *** Complete all applicable highlighted areas on both sides of this form. Incomplete applications may not be processed. *** Property Address: Prooertv Owner 3622 Garland Street, Wheat Ridge, Colorado, 80033, United States Josef Card Property Owner Email: josefcard@gmail.com Tenant Name (Commercial Projects Only) Property Owner Mailing Address: (if different than property address) Address: Same as property address State Architect/Engineer: Architect/Engineer E-mail: Contractor Name: BRS Field Ops LLC City of Wheat Ridge License #: Contractor E-mail Address: 180271 Phone: Pho permitting.department@blueravensolar.com For Plan Review Questions & Comments (please print): Phone:(t- j I (' J _�— ?t6 385-482-0045 CONTACT NAME (please print): Linsey McClain Phone: 385-482-0045 CONTACT EMAIL(p/ease print): permitting.department@blueravensolar.com Sub Contractors (Must provide Wheat Ridge License No & Signed Subcontractor Authorization form): Electrical: Plumbing: Mechanical: W.R. City License # W.R. City License # W.R. City License # Other City Licensed Sub: Other City Licensed Sub: City License # City License # Complete all highlighted fields. ❑COMMERCIAL D RESIDENTIAL Provide description of work: For ALL projects, provide a detailed description of work to be performed, including current use of areas, proposed uses, square footage, existing condition and proposed new condition, appliance size and efficiency, type and amount of materials to be used, etc. Residential Solar Rooftop PV System 11.9 kW SCOPE OF WORK INSTALLATION OF UTILITY INTERACTIVE PHOTOVOLTAIC SOLAR SYSTEM 11.895 kW DC PHOTOVOLTAIC SOLAR ARRAY ROOF TYPE: Comp Shingle MODULES: (39) Seraphim SEG-6MB-305BB INVERTER(S): Enphase IQ7-60-2-US,---- RACKING: Unirac SFM Infinity Sq. Ft./LF Amps 200 BTUs n/a Gallons n/a Squares For Solar: 11.9 Kw 39 # of Panels n/a Requires Structural For Commercial Projects Only: Occupancy Type: Construction Type: Occupancy Load: Square Footage: _ Project Value: (Contract value or the cost of all materials and labor included in the entire project) $ � Goo OWNER/CONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT I hereby certify that the setback distances proposed by this permit application are accurate and do not violate applicable ordinances, rules or regulations of the City of Wheat Ridge or covenants, easements or restrictions of record; that all measurements shown and allegations made are accurate; that I have read and agree to abide by all conditions printed on this application and that I assume full responsibility for compliance with applicable City of Wheat Ridge codes and ordinances for work under any permit issued based on this application; that I am the legal owner or have been authorized by the legal owner of the property to perform the described work and am also authorized by the legal owner of any entity included on this application to list that entity on this application. I, the applicant for this building permit application, warrant the truthfulness of the information provided on the application. CIRCLE ONE: (OWNER) (CONTRACTOR) or (AUTHORIZED REPRESENTATIVE) of (OWNER) (CONTRACTOR) Signature (first and last name): For BRS Field Ops LLC DATE: 01/30/2020 Printed Name: Linsey mcClain ZONING COMMMENTS: Reviewer: BUIL NG DEP-6STMENT COMMENTS: view PUBLIC WORKS COMMENTS: Reviewer: DEPARTMENT USE ONLY OCCUPANCY CLASSIFICATION: CONSTRUCTION TYPE: Building Division Valuation: omusJ60 T RU'cCTU R A 1, 'ENG TNEERTNG i.I.0 January 27, 2020 To: Blue Raven Solar 1403 North Research Way, Building J Orem, UT. 84097 Subject: Certification Letter Card Residence 3622 Garland St. Wheat Ridge, CO. 80033 To Whom It May Concern, Domus Structural Engineering, LLC P.O. Box 6986 Broomfield, CO 80021 530-864-7055 Domusstructural@gmail.com A jobsite observation of the condition of the existing framing system was performed by an audit team of Blue Raven Solar as a request from Domus Structural Engineering. All review is based on these observations and the design criteria listed below and only deemed valid if provided information is true and accurate. On the above referenced project, the roof structural framing has been reviewed for additional loading due to the installation of the solar PV addition to the roof. The structural review only applies to the section of the roof that is directly supporting the solar PV system and its supporting elements. The observed roof framing is described below. If field conditions differ, contractor to notify engineer prior to starting construction. The roof structures of (MP1,2&3) consist of composition shingle on roof plywood that is supported by pre -manufactured trusses that are spaced at @ 24"o.c.. The top chords, sloped at 19 degrees, are 2x4 sections, the bottom chords are 2x4 sections and the web members are 2x4 sections. The truss members are connected by steel gusset plates. The max unsupported projected horizontal top chord span is approximately 6-8". The existing roof framing systems of (MP1,2&3) are judged to be adequate to withstand the loading imposed by the installation of the solar panels. No reinforcement is necessary. The spacing of the solar standoffs should be kept at 72" o.c. for landscape and 48" o.c. for portrait orientation, with a staggered pattern to ensure proper distribution of loads. The scope of this report is strictly limited to an evaluation of the fastener attachment, underlying framing and supporting structure only. The attachment's to the existing structure are required to be in a staggered pattern to ensure proper distribution of loading. All panels, racking and hardware shall be installed per manufacturer specifications and within specified design limitations. All waterproofing shall be provided by the manufacturer. Domus Structural Engineering assumes no responsibility for misuse or improper installation of the solar PV panels or racking. Note: Seismic check is not required since Ss<.4g and Seismic Design Category (SDC) < B Design Criteria: • Applicable Codes = 2012 IBC/IRC, ASCE 7-10 • Roof Dead Load = 7 psf (MP1,2&3) • Roof Live Load = 20 psf • Wind Speed = 135 mph (Vult), Exposure C, Risk Category II • Roof Snow Load = 30 psf • Attachments: 1 - 5/16" dia. lag screw with 2.5 inch min embedment depth, at spacing shown above. Please contact me with any further questions or concerns regarding this project. Sincerely, of ?:160 John Calvert, P.E. gtulldXA"t�— Project Engineer Card Residence, Wheat Rldge, CO 1 Domus Structural Engineering, LLC 0 N1 T 1 S P.O. Box 6986 Broomfield, CO 80021 530-864-7055 -E_ N t; T iV F F R T N C T. L Domusstructural@gmail.com Gravity Loading Roof Snow Load Calculations p9 = Ground Snow Load = 30 psf pf = 0.7 Ce Ct I pg (ASCE7 - Eq 7-1) Ce = Exposure Factor = 1 (ASCE7 - Table 7-2) Ct = Thermal Factor = 1 (ASCE7 - Table 7-3) 1 = Importance Factor = 1 pf = Flat Roof Snow Load = 30.0 psf p5 = Cspf (ASCE7 - Eq 7-2) Cs = Slope Factor = 1 ps = Sloped Roof Snow Load = 30.0 psf PV Dead Load = 3 psf (Per Blue Raven Solar) DL Adjusted to 19 Degree Slope 3.17 psf PV System Weight 4.00 Weight of PV System (Per Blue Raven Solar) 3.0 psf X Standoff Spacing = 4.00 ft Y Standoff Spacing = 5.50 ft Standoff Tributary Area = 22.00 sft Point Loads of Standoffs 66 Ib Note: PV standoffs are staggered to ensure proper distribution of loading Roof Live Load = 20 psf Note: Roof live load is removed in area's covered by PV array. Roof Dead Load (MP1,2&3) Composition Shingle 4.00 Roof Plywood 2.00 2x4 Top Chords @ 24"o.c. 0.73 Vaulted Ceiling 0.00 (Ceiling Not Vaulted) Miscellaneous 0.27 Total Roof DL (MP1,2&3) 7.0 psf DL Adjusted to 19 Degree Slope 7.4 psf 0110 11 of w�eatRid9e Card Residence, Wheat Rldge, CO 2 t,�Domus Structural Engineering, LLC m t i s P.O. Box 6986 Broomfield, CO 80021 "I' K C l' C " K . I} 530-864-7055 N G T N EE Fc T N C, LLC: Domusstructural@gmail.com Wind Calculations Per ASCE 7-10 Components and Cladding Input Variables Wind Speed 135 mph Exposure Category C Roof Shape Hip/Gable Roof Slope 19 degrees Mean Roof Height 20 ft Effective Wind Area 19.3 ft Design Wind Pressure Calculations Wind Pressure P = qh*G*Cn ok qh = 0.00256 * Kz * Kzt * Kd * V^2 (Eq. 30.3-1) Kz (Exposure Coefficient) = 0.9 (Table 30.3-1) Kzt (topographic factor) = 1 (Fig. 26.8-1) Kd (Wind Directionality Factor) = 0.85 (Table 26.6-1) V (Design Wind Speed) = 135 mph (Fig. 26.5-1A) Risk Category = II (Table 1.5-1) qh = 35.69 Uplift Pressure = 0.6*qh= 21.42 -29.77 psf Standoff Uplift Calculations -Portrait ok Fastener Capacity Check Zone 1 Zone 2 Zone 3 Positive Embedment Depth = 2.5 GCp = -0.84 -1.39 -2.23 0.38 (Fig. 30.4-1) Uplift Pressure = -17.95 psf -29.77 psf -47.71 psf 13.4 psf X Standoff Spacing = 4.00 4.00 2.67 Y Standoff Spacing = 5.50 2.75 2.75 Tributary Area = 22.00 11.00 7.33 Footing Uplift = -395 Ib -327 Ib -350 Ib Standoff Uplift Calculations -Landscape Zone 1 Zone 2 Zone 3 Positive GCp = -0.84 -1.39 -2.23 0.38 (Fig. 30.4-1) Uplift Pressure = -17.95 psf -29.77 psf -47.71 psf 10.0 psf (Minimum) X Standoff Spacing = 6.00 6.00 4.00 Y Standoff Spacing = 3.50 1.75 1.75 Tributary Area = 21.00 10.50 7.00 Footing Uplift = -377 Ib -313 Ib -334 Ib Standoff Uplift Check Maximum Design Uplift = -395 Ib Standoff Uplift Capacity = 450 Ib 450 Ib capacity > 395 Ib demand Wherefore, OK Card Residence, Wheat Rldge, CO 3 ok Fastener Capacity Check Fastener = 1 - 5'16" dia. lag ,�p•`�g Number of Fasteners = 1 Embedment Depth = 2.5 Pullout Capacity Per Inch = 250 Ib Fastener Capacity = 625 Ib v w/ F.S. of 1.5 & DOL of 1.6= 667 Ib 667.2 Ib capacity > 395 Ib demand erefore, OK Card Residence, Wheat Rldge, CO 3 C)" ti S -S TRUCT�£KA1s 'ENGINEER ING L L( Framing Check (MP1,2&3) Dead Load 7.4 psf PV Load 3.2 psf Snow Load 30.0 psf Domus Structural Engineering, LLC P.O. Box 6986 Broomfield, CO 80021 530-864-7055 Domusstructural@gmail.com w = 81 plf 2x4 Top Chords @ 24"o.c. 0 Governing Load Combo = DL + SL Total Load 40.6 psf Member Span = 6'- 8" Member Properties Member Size S (in^3) I (in"4) Lumber Sp/Gr Member Spacing 2x4 3.06 5.36 DF#2 @ 24"o.c. Check Bending Stress Fb (psi) = fb x Cd x Cf x Cr (NDS Table 4.3.1) 900 x 1.15 x 1.5 x 1.15 Allowed Bending Stress = 1785.3 psi Maximum Moment = (wL12) / 8 = 450.8467 ft# = 5410.161 in# Actual Bending Stress = (Maximum Moment) / S =1766.6 psi Allowed > -- 99% Stressed -- Therefore, OK Check Deflection Allowed Deflection (Total Load) = 1-180 (E = 1600000 psi Per NDS) = 0.444 in Deflection Criteria Based on = Continuous Span Actual Deflection (Total Load) _ (w*L"4) / (185*E*I) = 0.175 in = L/458 > U180 Therefore OK Allowed Deflection (Live Load) _ Actual Deflection (Live Load) _ L'240 0.333 in (w*L"4) / (185*E*I) 0.130 in L/616 > L/240 Therefore OK Check Shear Member Area = 5.3 in12 Fv (psi) = 180 psi (NDS Table 4A) Allowed Shear = Fv * A = 945 Ib Max Shear (V) = w * L / 2 = 271 Ib Allowed > Actual •- 28.7% Stressed -- Therefore, OK Card Residence, Wheat Rldge, CO 4 GENERALNOTES CODES AND STANDARDS 1. ALL WORK SHALL COMPLY WITH 2017 NATIONAL ELECTRIC CODE (NEC), 2012 INTERNATIONAL BUILDING CODE (IBC).. 2012 INTERNATIONAL RESIDENTIAL CODE (IRC), 2015 INTERNATIONAL PLUMBING CODE (IPC). AND ALL STATE AND LOCAL BUILDING. ELECTRICAL, AND PLUMBING CODES. 2. DRAWINGS HAVE BEEN DETAILED ACCORDING TO UL LISTING REQUIREMENTS SITE NOTES / OSHA REGULATION 1. A LADDER SHALL BE IN PLACE FOR INSPECTION IN COMPLIANCE WITH OSHA REGULATIONS, 2. THE PV MODULES ARE CONSIDERED NON-COMBUSTIBLE AND THIS SYSTEM IS AN UTILITY INTERACTIVE SYSTEM WITH NO STORAGE BATTERIES. 3. THE SOLAR PV INSTALLATION SHALL NOT OBSTRUCT ANY PLUMBING, MECHANICAL OR BUILDING ROOF VENTS. 4 ROOF COVERINGS SHALL BE DESIGNED, INSTALLED, AND MAINTAINED IN ACCORDANCE WITH THIS CODE AND THE APPROVED MANUFACTURER'S INSTRUCTIONS SUCH THAT THE ROOF COVERING SHALL SERVE TO PROTECT THE BUILDING OR STRUCTURE. 5.NUMBER OF SHINGLE LAYER -1 SOLAR CONTRACTOR 1. MODULE CERTIFICATIONS WILL INCLUDE UL1703. IEC61646, IEC61730. 2 IF APPLICABLE, MODULE GROUNDING LUGS MUST BE INSTALLED AT THE MARKED GROUNDING LUG HOLES PER THE MANUFACTURERS' INSTALLATION REQUIREMENTS. 3 AS INDICATED BY DESIGN, OTHER NRTL LISTED MODULE GROUNDING DEVICES MAY BE USED IN PLACE OF STANDARD GROUNDING LUGS AS SHOWN IN MANUFACTURER DOCUMENTATION AND APPROVED BY THE AHJ. 4 CONDUIT AND WIRE SPECIFICATIONS ARE BASED ON MINIMUM CODE REQUIREMENTS AND ARE NOT MEANT TO LIMIT UP-SIZING AS REQUIRED BY FIELD CONDITIONS. 5 CONDUIT POINT OF PENETRATION FROM EXTERIOR TO INTERIOR TO BE INSTALLED AND SEALED WITH A SUITABLE SEALING COMPOUND 6 DC WIRING LIMITED TO MODULE FOOTPRINT W/ ENPHASE AC SYSTEM 7 ENPHASE WIRING SYSTEMS SHALL BE LOCATED AND SECURED UNDER THE ARRAY W/ SUITABLE WIRING CLIPS. 8 MAX DC VOLTAGE CALCULATED USING MANUFACTURER PROVIDED TEMP COEFFICIENT FOR VOC UNLESS NOT AVAILABLE 9 ALL INVERTERS, MOTOR GENERATORS, PHOTOVOLTAIC MODULES. PHOTOVOLTAIC PANELS.. AC PHOTOVOLTAIC MODULES. DC COMBINERS DC -TO -DC CONVERTERS.SOURCE CIRCUIT COMBINERS.. AND CHARGE CONTROLLERS INTENDED FOR USE IN A PHOTOVOLTAIC POWER SYSTEM WILL BE IDENTIFIED AND LISTED FOR THE APPLICATION PER 690.4 (B) 10. ALL SIGNAGE TO BE PLACED IN ACCORDANCE WITH LOCAL BUILDING CODE. 11 TERMINALS AND LUGS WILL BE TIGHTENED TO MANUFACTURER TORQUE SPECIFICATIONS (WHEN PROVIDED) IN ACCORDANCE WITH NEC CODE 110.14(D) ON ALL ELECTRICAL CONNECTIONS. EQUIPMENT LOCATIONS 1 PROPER ACCESS AND WORKING CLEARANCE AROUND EXISTING AND PROPOSED ELECTRICAL EQUIPMENT WILL BE PROVIDED AS PER SECTION [NEC 110.26] 2 EQUIPMENT INSTALLED IN DIRECT SUNLIGHT MUST BE RATED FOR EXPECTED OPERATING TEMPERATURE AS SPECIFIED BY [NEC 690.31 (A) -(B)] AND [NEC TABLE 310.15 (B)]. 3. ADDITIONAL AC DISCONNECTS SHALL BE PROVIDED WHERE THE INVERTER IS TO THE UTILITY AC DISCONNECT, OR NOT WITHIN SIGHT OF THE UTILITY AC DISCONNECT. 4. ALL EQUIPMENT SHALL BE INSTALLED ACCESSIBLE TO QUALIFIED PERSONNEL ACCORDING TO NEC APPLICABLE CODES. 5. ALL COMPONENTS ARE LISTED FOR THEIR PURPOSE AND RATED FOR OUTDOOR USAGE WHEN APPROPRIATE. APPROVED A-5 k -);ayva::: > Rewkwed for Code ComoNe A 6. 7-OZ05 Plans Ixaminer Date 9c!®u[anoft' 7Missron va/ov~*reawowra obnwrcow6w t� y/lelrllpt br ODe ib; OM aw-#.&ww66wwN. oora/Mrwow'stwe aloe amp code r a/0w onaeNft am pawnivtowroutswily30Vwwrclam ar/iwblwclaw "Awlt coda as ar l.r 1e eeat AGr?IAI \/IG\A/ DESIGN CRITERIA WIND SPEED: 135 MPH GROUND SNOW LOAD: 30 PSF WIND EXPOSURE FACTOR: C SEISMIC DESIGN CATEGORY: B SCOPE OF WORK ZA w G Ail SITE SPECIFICATIONS OCCUPANCY -R3 CONSTRUCTION - V -B ZONING: RESIDENTIAL I s 1- 2k ' NNW SHEET INDEX INSTALLATION OF UTILITY INTERACTIVE PHOTOVOLTAIC SOLAR SYSTEM 5.49 kW DC PHOTOVOLTAIC SOLAR ARRAY ROOF TYPE: Comp Shingle MODULES: (18) Seraphim SEG-6MB-305BB INVERTER(S): Enphase IQ7-60-2-US,---- RACKING: Unirac SFM Infinity 1i NA,EGEk CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 ' CONTRACTOR: BRS FIELD OPS 385.498.6700 d' PV1 - COVER SHEET PV2 - PROPERTY PLAN PV3 - SITE PLAN PV4 - EQUIPMENT & ATTACHMENT DETAIL PV5 - ELECTRICAL SINGLE LINE DIAGRAM PV6 - ELECTRICAL CALCULATIONS & ELECTRICAL NOTES PV7 - MAIN BREAKER DERATE CALCS. (IF NEEDED) PV8 - LABELS & LOCATIONS PV9 - CUSTOM DIRECTORY PLACARD (IF NEEDED - NEC 690.56(B)) Approval Notes: 1) PV array system to have a grounding system installed per Part III of Article 250 per 2017 NEC Art.690.47(A) 2)lf UFER ground is not avail provide or verify suppl. ground rods per 2017 NEC Art.250.104(B) 3) Natural Gas piping to be bonded s per 2017 NEC Art. 250.104(B). 5 co BLUE RAVEN 1403 N RESEARCH WAY, BUILDING J �I OREM UT 84097 800-377-4480 CD WWW BLUERAVENSOLAR COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE M USED FOR THE BENEFIT OF ANYONE EXCEPT O BLUERAVENSOLAR NOR SHALL IT Z BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE O F— EQUIPMENT. WITHOUT THE m WRITTEN PERMISSION OF LLI N BLUERAVENSOLAR LLC. Y a) 00 to NA,EGEk CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 ' CONTRACTOR: BRS FIELD OPS 385.498.6700 d' PV1 - COVER SHEET PV2 - PROPERTY PLAN PV3 - SITE PLAN PV4 - EQUIPMENT & ATTACHMENT DETAIL PV5 - ELECTRICAL SINGLE LINE DIAGRAM PV6 - ELECTRICAL CALCULATIONS & ELECTRICAL NOTES PV7 - MAIN BREAKER DERATE CALCS. (IF NEEDED) PV8 - LABELS & LOCATIONS PV9 - CUSTOM DIRECTORY PLACARD (IF NEEDED - NEC 690.56(B)) Approval Notes: 1) PV array system to have a grounding system installed per Part III of Article 250 per 2017 NEC Art.690.47(A) 2)lf UFER ground is not avail provide or verify suppl. ground rods per 2017 NEC Art.250.104(B) 3) Natural Gas piping to be bonded s per 2017 NEC Art. 250.104(B). 5 DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 SHEET NAME COVER SHEET PAGE NUMBER REVISION RV1 0 co 0 co �I CD CO M O �? Z O F— m O o U LLI N O Z Wto C0 Y a) 00 to U > Wi- q Cf) LUF— Cf) (n p DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 SHEET NAME COVER SHEET PAGE NUMBER REVISION RV1 0 104'-9" LEGEND 278'-9" v DC SYSTEM SIZE: 5.49 kW DC ROOF TYPE: Comp Shingle (18) Seraphim SEG-6MB-305BB Enphase IQ7-60-2-US,----INVERTER 106'-2" a� Q) w Lo N 70 PV WIRE STRING PROPERTY LINE BLUE RAVEN 1403 N RESEARCH WAY, BUILDING J OREM,UT84097 800-377-4480 WWW.BLUERAVENSOLAR COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUERAVENSOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLARLLC. CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 SCALE: 3/64" = 1'-0" CONTRACTOR: C 2t, <2 ,-15 BRS FIELD OPS 385.498.6700 X INV INVERTER & DC DISCONNECT SUB (E) SUBPANEL LC (N) LOAD CENTER AC AC DISCONNECT ❑M UTILITY METER 278'-1" cY o 'S MSP MAIN SERVICE PANEL 25'-5" C) JB JUNCTION BOX TS TRANSFER SWITCH FF N C❑ COMBINER BOX/AGGREGATOR ® Z PV PV REVENUE METER c ® FIRE SETBACK EMT CONDUIT RUN O (TO BE DETERMINED IN FIELD) 278'-9" v DC SYSTEM SIZE: 5.49 kW DC ROOF TYPE: Comp Shingle (18) Seraphim SEG-6MB-305BB Enphase IQ7-60-2-US,----INVERTER 106'-2" a� Q) w Lo N 70 PV WIRE STRING PROPERTY LINE BLUE RAVEN 1403 N RESEARCH WAY, BUILDING J OREM,UT84097 800-377-4480 WWW.BLUERAVENSOLAR COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUERAVENSOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLARLLC. CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 SCALE: 3/64" = 1'-0" CONTRACTOR: C 2t, <2 ,-15 BRS FIELD OPS 385.498.6700 X DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 SHEET NAME PROPERTY PLAN PAGE NUMBER REVISION PV2 1 0 cY o 'S C) Y CID rn O Z c O _o O U u 1 N O Z 0 00 +. > w ai CM 75 w C/) } wE Cz Ln N CO (n DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 SHEET NAME PROPERTY PLAN PAGE NUMBER REVISION PV2 1 0 CHIMNEY DC SYSTEM SIZE: 5.49 kW DC ROOF TYPE: Comp Shingle (18) Seraphim SEG-6MB-305BB Enphase IQ7-60-2-US,----INVERTER OVERHEAD SERVICE LINE 40'-6" — M MSP PV AC C N(A) 0 42'-6" = 0 42'-6" 1 ❑ 1 0 69'-7" 1 I I 1 J. CHIMNEY I 35'-9" LU O LL O z O 0' LL LEGEND INV INVERTER & DC DISCONNECT RAVEN BLUE ❑ (E) SUBPANEL JB el e O 1403 N RESEARCH WAY, BUILDING J AC ❑ AC DISCONNECT OREM. UT 84097 O Y 800-377-4480 El o WWW BLUE RAVEN SOLAR.COM aUTILITY METER O 27'-1" MSP F MAIN SERVICE PANEL HEREIN CONTAINED SHALL NOT BE 2- USED FOR THE BENEFIT OF 27'-1" MP1 ANYONE EXCEPT O ❑ a) BLUERAVENSOLAR NOR SHALL IT w N O Z 1 BE DISCLOSED IN WHOLE OR IN # OF MODULES: 18 TS E TRANSFER SWITCH PART TO OTHERS OUTSIDE N � CO D RECIPIENTS ORGANIZATION, AZIMUTH:91 ° C❑ COMBINER BOX/AGGREGATOR SALE AND USE OF THE RESPECTIVE PV 8 PV REVENUE METER EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLAR LLC. PITCH:18° FIRE SETBACK ❑ EMT CONDUIT RUN FIELD) r /y r NABC E P (TO BE DETERMINED IN , C_E_R_TIFIE_D TSRF:77% �I PvWIRE STRING PV INSTALLATION i PROFESSIONAL jPROPERTY AREA: 489.37 SQ. FT I 35'-9" LU O LL O z O 0' LL LEGEND INV INVERTER & DC DISCONNECT RAVEN BLUE SUB (E) SUBPANEL LC (N) LOAD CENTER O 1403 N RESEARCH WAY, BUILDING J AC ❑ AC DISCONNECT OREM. UT 84097 O Y 800-377-4480 WWW BLUE RAVEN SOLAR.COM aUTILITY METER O CONFIDENTIAL - THE INFORMATION MSP F MAIN SERVICE PANEL HEREIN CONTAINED SHALL NOT BE 2- USED FOR THE BENEFIT OF JB JUNCTION BOX ANYONE EXCEPT O a) BLUERAVENSOLAR NOR SHALL IT w N O Z a > m BE DISCLOSED IN WHOLE OR IN W -0 TS E TRANSFER SWITCH PART TO OTHERS OUTSIDE N � CO D RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE C❑ COMBINER BOX/AGGREGATOR SALE AND USE OF THE RESPECTIVE PV 8 PV REVENUE METER EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLAR LLC. ® FIRE SETBACK EMT CONDUIT RUN FIELD) r /y r NABC E P (TO BE DETERMINED IN , C_E_R_TIFIE_D PvWIRE STRING PV INSTALLATION i PROFESSIONAL jPROPERTY LINE Scott Gurney 1 # PV -011719-015866 CONTRACTOR: SCALE: 3/32" = V-0" 8 i6 BRS FIELD OPS 385.498.6700 Sealed For Existing Roof & Attachment {inly X DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 SHEET NAME SITE PLAN PAGE NUMBER REVISION Pv3 0 M 0 O O Y O O O z 2- O a) _o O U w N O Z a > m C/) w W -0 U) w CO >- LU U) E cn N � CO D DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 SHEET NAME SITE PLAN PAGE NUMBER REVISION Pv3 0 PV ARRAY INFORMATION LL LL O 0 Z Q_ �o O- OQ) m U J_ U) Q I— W 0 y LL LL O 0 Z H W ao O W 1 J Q M U _J (n Q H W 0 U PV MODULE COUNT: 18 MODULES # OF ATTACHMENT POINTS: 28 ARRAY AREA: Module Count x 17.51ft2 = 315.2ft2 ROOF AREA: 2691.2ft2 % OF ARRAY/ROOF: 11.7% ARRAY WEIGHT: Module Count x 50lbs = 900.0lbs DISTRIBUTED LOAD: Array Weight _ Array Area = 2.86 IbS/ft2 POINT LOAD: Array Weight-, Attachments= 32.1 lbs/attachment Infinity IMRAIL Seraphim SEG-6MB-305BB PV MODULE (E) ROOF MEMBRANE UNIRAC SLIDERS AND TRIMRAIL ROOF ATTACHMENTS FLASHING 5/16" STAINLESS STEEL LAG BOLT WITH 2-1/2" MIN. EMBEDMENT AND FLAT WASHER (E) BUILDING STRUCTURE Unirac SFM Infinity Seraphim SEG-6MB-305BB PV MODULE (E) ROOF MEMBRANE UNIRAC SLIDERS FLASHING 5/16" STAINLESS STEEL LAG BOLT WITH 2-1/2" MIN. EMBEDMENT AND FLAT WASHER (E) BUILDING STRUCTURE PV MODULE (BEHIND TRIM RAIL) � 1'-11" 1 48" MAX. --) MAX. Unirac SFM Infinity TRIM RAIL PORTRAIT SFM Infinity Flashkit RACKING ATTACHMENTS TO BE STAGGERED BY SHIFTING EACH Unirac SFM Infinity FRAME SUBSEQUENT ROW OF ATTACHMENTS ONE RAFTER OVER. ( H PV4 i^ G PV4 LANDSCAPE ARRAY DETAIL, FRONT VIEW Scale: 3/8" = V-0" PORTRAIT LANDSCAPE SAY DETAIL, SIDE VIEW ROOF TYPE: Comp Shingle ROOF FRAMING TYPE: Rafter RAFTER OR TOP CHORD(TRUSS) 2x6 @ 24"O.C. CEILING JOIST OR BOTTOM CHORD(TRUSS) 2x6 @ 16"O.C. Scale: 3/8" = V-0" Sealed For Existing Roar' & Attachment Only GXty 01 „t Fudge Oy�.\s\Or\ 'IIII�1* BLUE RAVEN 1403 N RESEARCH WAY, BUILDING J OREM, UT 84097 800-377-4480 WWW. BLUE RAV ENSO LAR. COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUERAVENSOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLAR LLC. NABCEF' CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 IN DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 / \'>'�. // t �.�/' SHEET NAME (�EQUIP. DETAIL i PAGE NUMBER REVISION PV4 0 cY) 0 O O Y 00 O O Z O (D L_ o O U 6i N O Z N m U > L1J U) LU U) LU U) U N co U) 0 DRAWING BY DIN ENGINEERING DATE January 23, 2020 PROJECT NUMBER 70881689 / \'>'�. // t �.�/' SHEET NAME (�EQUIP. DETAIL i PAGE NUMBER REVISION PV4 0 (1) 10 AWG THHN/THWN-2, CU., BLACK (Ll) 18.0 A AC (2) 12 - 2 OF -B W/G, THHN/THWN-2, SOLID CU. 15 (1) 10 AWG THHN/THWN-2, CU., RED (L2) 240 V AC 3 (1) 10 AWG THHN/THWN-2, CU., WHITE (N) (1) 10 AWG THHN/THWN-2, CU., GREEN (EGC) (1) 3/4 INCH EMT EXTERIOR (1) 3/4 INCH EMT 1. ALL CONDUIT TO BE RAN AT LEAST 7/8" ABOVE ROOF SURFACE WHERE EXPOSED TO SUNLIGHT. 2. TERMINALS AND LUGS WILL BE TIGHTENED TO MANUFACTURER TORQUE SPECIFICATIONS (WHEN PROVIDED) IN ACCORDANCE WITH NEC CODE 110.14(D) ON ALL ELECTRICAL CONNECTIONS. 3. CONDUIT AND CONDUCTOR SPECIFICATIONS ARE BASED ON MINIMUM CODE REQUIREMENTS AND ARE NOT MEANT TO LIMIT UP-SIZING AS REQUIRED BY FIELD CONDITIONS. (E)150A MAIN SERVICE PANEL (E)150A / 2P MAIN BREAKER (E)150A / 2P (E)LOADS (N)25A / 2F UTILITY PV PV BREAKER TO BE LOCATED OPPOSITE PRODUCTION METER 200A END OF BUSSING FROM MAIN BREAKER LEVER BYPASS METER SOCKET MAX 9.0 A A �(I) 12 - 2 OF -B W/G, THHN/THWN-2, SOLID CU. MAX 9.0 A 240 V A 2 240 V INTERI 1(1) 12-2 TC-ER,THHN/THWN-2, CU. MAX 9.0 A 1 (1) 6 AWG BARE, CU (EGC) 240 V EXTERIOR B LUE RAVEN 1403 N RESEARCH WAY BUILDING J OREM. UT 84097 800-377-4480 WWW BLUERAVENSOLAR.COM L� (18) Seraphim SEG-6MB-305BB CONFIDENTIAL - THE INFORMATION EGC 120/240 VAC 1. The self-contained metering will be in compliance F FEED -THROUGH LUGS 60HZ 1. ONE OF THE METHODS THAT FOLLOWS SHALL BE USED TO DETERMINE THE RATINGS OF ON PANELBOARD 1 PHASE 18 En IQ7-60-2-US MICRO INVERTERS ( ) Kase P USED FOR THE BENEFIT OF ANYONE EXCEPT TO UTILITY BUSBAR SHALL NOT EXCEED THE AMPACITY OF THE BUS BAR. (b) WHERE TWO SOURCES, (E)150A LOAD CENTER GRID(N)15OA/2P BLUERAVENSOLAR NOR SHALL IT BUSBAR THAT CONTAINS LOADS, THE SUM OF 125 PERCENT OF THE INVERTER(S) OUTPUT III N CIRCUIT CURRENT AND THE RATING OF THE OVERCURRENT DEVICE PROTECTING THE L, MAX 9.0 A A �(I) 12 - 2 OF -B W/G, THHN/THWN-2, SOLID CU. MAX 9.0 A 240 V A 2 240 V INTERI 1(1) 12-2 TC-ER,THHN/THWN-2, CU. MAX 9.0 A 1 (1) 6 AWG BARE, CU (EGC) 240 V EXTERIOR B LUE RAVEN 1403 N RESEARCH WAY BUILDING J OREM. UT 84097 800-377-4480 WWW BLUERAVENSOLAR.COM ENPHASE COMBINER BOX WILL BE ACCESSIBLE TO UTILITY COMPANY 24/7 - - - (N) NEW 150A/2P BREAKER " (E)LOAD TO BE INSTALLED TO PROTECT LOAD SIDE OF (E) FEEDERS PER NEC 705.12(D)(2)(1) G4-qGc N I III I I G (E) GROUNDING (18) Seraphim SEG-6MB-305BB CONFIDENTIAL - THE INFORMATION PV Production meter notes: 1. The self-contained metering will be in compliance UL 1703 COMPLIANT HEREIN CONTAINED SHALL NOT BE 1. ONE OF THE METHODS THAT FOLLOWS SHALL BE USED TO DETERMINE THE RATINGS OF Energy Standard; specifically Section 4.11. BUSBARS AND PANELBOARDS. (a) THE SUM OF 125 PERCENT OF THE INVERTER(S) OUTPUT 18 En IQ7-60-2-US MICRO INVERTERS ( ) Kase P USED FOR THE BENEFIT OF ANYONE EXCEPT the PV generation wired to the line side terminals BUSBAR SHALL NOT EXCEED THE AMPACITY OF THE BUS BAR. (b) WHERE TWO SOURCES, (top of meter block). UL 1741 COMPLIANT BLUERAVENSOLAR NOR SHALL IT BUSBAR THAT CONTAINS LOADS, THE SUM OF 125 PERCENT OF THE INVERTER(S) OUTPUT be marked with a stamped brass, aluminum, or CIRCUIT CURRENT AND THE RATING OF THE OVERCURRENT DEVICE PROTECTING THE 9 MODULES MAX FOR ALL SUB -BRANCH BE DISCLOSED IN WHOLE OR IN the unit, typically PROD" in accordance with 2. "WHERE THE INVERTER OUTPUT CONNECTION IS MADE TO A FEEDER AT A LOCATION the requirements for "Meter Identification" in Section CIRCUIT(S) TO COMPLY WITH VRISE CALCS PART TO OTHERSNTS OUTSIDE OVERCURRENT DEVICE, THAT PORTION OF THE FEEDER ON THE LOAD SIDE OF THE INVERTER 4. The PV production meter shall be located within IQ Combiner 3 JUNCTION BOX OUTPUT CONNECTION SHALL BE PROTECT BY ONE OF THE FOLLOWING: RECIPEnphase (a) THE FEEDER AMPACITY SHALL BE NOT LESS THAN THE SUM OF THE PRIMARY SOURCE X -IQ -AMI -240-3 (OPTIONAL IF OF -B shall be submitted for review. The local meter EXCEPT IN CONNEC TION WITH THE shop must approve the site plan for application (SOLAR LOADS ONLY) CABLE USED FOR CD SALE AND USE THE RESPECTIVE LIJE C/) NOTE TO INSTALLER: The current Placard that we require ENTIRE HOMERUN) JUNCTION BOX at the utility meter and AC Disconnect is a yellow with black EQUIPMENT. WITHOUT THE lettering WRITTEN PERMISSION OF BLUERAVENSOLAR LLC. (N)20A/2P (1) CIRCUIT L1 u uF—F OF 9 MODULES PV AC DISCONNECT L2 I I4 z N P, NON-FUSED G G B LOCKABLE, VISIBLE OPEN I- - - 30A, 240V, 2 -POLE N CERTIFIED _ PV INSTALLATION 2 JUNCTION BOX ' PROFESSIONAL Scott Gurney I _# PV -011719-015866 (N)20A/2P u O1 F 9 MOULESGCONTRACTOR: u GG eL2 BRS FIELD OPS 385.498.6700 ENPHASE COMBINER BOX WILL BE ACCESSIBLE TO UTILITY COMPANY 24/7 - - - (N) NEW 150A/2P BREAKER " (E)LOAD TO BE INSTALLED TO PROTECT LOAD SIDE OF (E) FEEDERS PER NEC 705.12(D)(2)(1) G4-qGc N I III I I G (E) GROUNDING M ELECTRODE (S) PV Production meter notes: 1. The self-contained metering will be in compliance INTERCONNECTION NOTES with the most recent revision of the Xcel 1. ONE OF THE METHODS THAT FOLLOWS SHALL BE USED TO DETERMINE THE RATINGS OF Energy Standard; specifically Section 4.11. BUSBARS AND PANELBOARDS. (a) THE SUM OF 125 PERCENT OF THE INVERTER(S) OUTPUT 2. The PV production meter will be required to have CIRCUIT CURRENT AND THE RATING OF THE OVERCURRENT DEVICE PROTECTING THE the PV generation wired to the line side terminals BUSBAR SHALL NOT EXCEED THE AMPACITY OF THE BUS BAR. (b) WHERE TWO SOURCES, (top of meter block). ONE THE UTILITY AND THE OTHER AN INVERTER ARE LOCATED AT OPPOSITE ENDS OF A 3. The meter socket for the PV production meter shall BUSBAR THAT CONTAINS LOADS, THE SUM OF 125 PERCENT OF THE INVERTER(S) OUTPUT be marked with a stamped brass, aluminum, or CIRCUIT CURRENT AND THE RATING OF THE OVERCURRENT DEVICE PROTECTING THE stainless steel tag, indicating the address including "PV BUSBAR SHALL NOT EXCEED 120 PERCENT OF THE AMPACITY OF THE BUSBAR [NEC 705.12]. the unit, typically PROD" in accordance with 2. "WHERE THE INVERTER OUTPUT CONNECTION IS MADE TO A FEEDER AT A LOCATION the requirements for "Meter Identification" in Section OTHER THAN THE OPPOSITE END OF THE FEEDER FROM THE PRIMARY SOURCE 4.14.4 of the Xcel Energy Standard. OVERCURRENT DEVICE, THAT PORTION OF THE FEEDER ON THE LOAD SIDE OF THE INVERTER 4. The PV production meter shall be located within ten (10) feet of the existing utility meter. If there OUTPUT CONNECTION SHALL BE PROTECT BY ONE OF THE FOLLOWING: is any reason this cannot be accomplished, a site (a) THE FEEDER AMPACITY SHALL BE NOT LESS THAN THE SUM OF THE PRIMARY SOURCE pian showing proposed equipment locations OVERCURRENT DEVICE AND 125 PERCENT OF THE INVERTER OUTPUT CIRCUIT CURRENT. shall be submitted for review. The local meter (b) AN OVERCURRENT DEVICE ON THE LOAD SIDE OF THE INVERTER CONNECTION SHALL BE shop must approve the site plan for application RATED NOT GREATER THAN THE AMPACITY OF THE FEEDER." [NEC 705.12]. approval; site meetings can be arranged upon CD request. LIJE C/) NOTE TO INSTALLER: The current Placard that we require NM co I at the utility meter and AC Disconnect is a yellow with black Ui p lettering Approval Notes: 1) PV array system to have a grounding system installed per Part III of Article 250 per 2017 NEC Art.690.47(A) 2)lf UFER ground is not avail provide or verify suppl. ground rods per 2017 NEC Art.250.104(B) 3) Natural Gas piping to be bonded s per 2017 NEC Art. 250.104(B). -j EEEfNG ry 23, 2020 PROJECT NUMBER 70881689 SHEET NAME ELEC. 3 LINE DIAG. PAGE NUMBER REVISION PV5 1 0 M O O 1 00 M o z u' O Q) _o O U 111 N 2 of O Z N m � > LL] CD U) H (n } LIJE C/) (n NM co I L Ui p EEEfNG ry 23, 2020 PROJECT NUMBER 70881689 SHEET NAME ELEC. 3 LINE DIAG. PAGE NUMBER REVISION PV5 1 0 .c lop., Ii n a��-uww-�wuu 305 W 39.9 V DC 32.3 V DC 9.45 A DC 9.76 A DC -0.28 %/°C -0.38 %/°C 20ADC ADJ. MODULE VOC @ ASHRAE LOW TEMP 44.3 V DC ADJ. MODULE VMP @ ASHRAE 2% AVG. HIGH TEMP 27.4 V DC rvu%.nvnv v �n i L -n Jr �%.0 +�n++vIvj a IPi+a3c POWER POINT TRACKI NG (MPPT) MIN/MAX 22 - 48 V DC MAXIMUM INPUT VOLTAGE 48 V DC MAXIMUM DC SHORT CIRCUIT CURRENT 15 A DC MAXIMUM USABLE DC INPUT POWER 350 W MAXIMUM OUTPUT CURRENT 1 A AC AC OVERCURRENT PROTECTION 20 A MAXIMUM OUTPUT POWER 240 W CEC WEIGHTED EFFICIENCY 97% AC PHU I UVULA I IC MUUULE MAKKINU (NEC. b9U.51) NOMINAL OPERATING AC VOLTAGE 240 V AC NOMINAL OPERATING AC FREQUENCY 47 - 68 HZ AC MAXIMUM AC POWER 240 VA AC MAXIMUM AC CURRENT 1.0 A AC MAXIMUM OCPD RATING FOR AC MODULE 20 A AC DESIGN LOCATION AND TEMPERATURES TEMPERATURE DATA SOURCE ASHRAE 2% AVG. HIGH TEMP STATE Colorado CITY Wheat Ridge WEATHER STATION SALISBURY WICOMICO CO AP ASHRAE EXTREME LOW TEMP (°C) -14 ASHRAE 2% AVG. HIGH TEMP (°C) 33 SYSTFM F1 FCTRICAL SPECIFICATIONS CIR 1 CIR 2 CIR 3 CIR 4 CIR 5 CIR 6 NUMBER OF MODULES PER MPPT DC POWER RATING PER CIRCUIT (STC) TOTAL MODULE NUMBER STC RATING OF ARRAY AC CURRENT @ MAX POWER POINT (IMP MAX. CURRENT ( IMP X 1.25) OCPD CURRENT RATING PER CIRCUIT MAX. COMB. ARRAY AC CURRENT (IMP) MAX. ARRAY AC POWER 9 2745 9 2745 VRISE(V) VEND(V %VRISE I0.7-9 VRISE SEC. 1(MICRO TO JBOX) 32.4 18 MODULES 5490W DC 9.0 11.25 20 9.0 11.25 20 VRISE SEC. 2(JBOXT000MBINERBOX) 80 12 Cu. 2.91 18.0 4320W AC AC VOLTAGE RISE CALCULATIONS DIST(FT) COND. VRISE(V) VEND(V %VRISE I0.7-9 VRISE SEC. 1(MICRO TO JBOX) 32.4 12 Cu. 1.18 241.18 0.49% VRISE SEC. 2(JBOXT000MBINERBOX) 80 12 Cu. 2.91 242.91 1.21% VRISE SEC. 3 (COMBINER BOX TO POI) 10 10 Cu. 0.46 240.46 0.19% TOTA L V RI S E JUNCTION BOX TO MAX. SHORT CIRCUIT CURRRENT (ISC) = 4.54 244.54 1.89% PHOTOVOLTAIC AC DISCONNECT OUTPUT LABEL ( NEC 690.54) AC OUTPUT CURRENT 18.0 A AC NOMINAL AC VOLTAGE 240 V AC GROUNDING NOTES 1. A GROUNDING ELECTRODE SYSTEM IN ACCORDANCE WITH [NEC 690-47] AND [NEC 250-501 THROUGH [NEC 250-60] SHALL BE PROVIDED. PER NEC, GROUNDING ELECTRODE SYSTEM OF EXISTING BUILDING MAY BE USED AND BONDED TO AT THE SERVICE ENTRANCE. IF EXISTING SYSTEM IS INACCESSIBLE. OR INADEQUATE. OR IS ONLY METALLIC WATER PIPING, A SUPPLEMENTAL GROUNDING ELECTRODE WILL BE USED AT THE INVERTER LOCATION CONSISTING OF A UL LISTED 8 FT GROUND ROD WITH ACORN CLAMP. 2. THE GROUNDING ELECTRODE CONDUCTOR SHALL BE PROTECTED FROM PHYSICAL DAMAGE BETWEEN THE GROUNDING ELECTRODE AND THE PANEL (OR INVERTER) IF SMALLER THAN #6 AWG COPPER WIRE PER NEC 250-64B. THE GROUNDING ELECTRODE CONDUCTOR WILL BE CONTINUOUS, EXCEPT FOR SPLICES OR JOINTS AT BUSBARS WITHIN LISTED EQUIPMENT PER [NEC 250.64C.]. 3. GROUNDING ELECTRODE CONDUCTORS SHALL BE NO LESS THAN #8 AWG AND NO GREATER THAN #6 AWG COPPER AND BONDED TO THE EXISTING GROUNDING ELECTRODE TO PROVIDE FOR A COMPLETE SYSTEM. 4. PV SYSTEM SHALL BE GROUNDED IN ACCORDANCE TO [NEC 250.211. [NEC TABLE 250 122]. AND ALL METAL PARTS OR MODULE FRAMES ACCORDING TO [NEC 690.46]. 5. MODULE SOURCE CIRCUITS SHALL BE GROUNDED IN ACCORDANCE TO [NEC 690.42]. 6. THE GROUNDING CONNECTION TO A MODULE SHALL BE ARRANGED SUCH THAT THE REMOVAL OF A MODULE DOES NOT INTERRUPT A GROUNDED CONDUCTOR TO ANOTHER MODULE. 7. EACH MODULE WILL BE GROUNDED USING THE SUPPLIED CONNECTIONS POINTS IDENTIFIED IN THE MANUFACTURER'S INSTALLATION INSTRUCTIONS. 8. ENCLOSURES SHALL BE PROPERLY PREPARED WITH REMOVAL OF PAINT/FINISH AS APPROPRIATE WHEN GROUNDING EQUIPMENT WITH TERMINATION GROUNDING LUGS. 9. GROUNDING SYSTEM COMPONENTS SHALL BE LISTED FOR THEIR PURPOSE, AND GROUNDING DEVISES EXPOSED TO THE ELEMENTS SHALL BE RATED FOR DIRECT BURIAL. 10. GROUNDING AND BONDING CONDUCTORS SHALL BE COPPER, SOLID OR STRANDED, AND BARE WHEN EXPOSED 11. EQUIPMENT GROUNDING CONDUCTORS SHALL BE SIZE ACCORDING TO [NEC 690.45] AND BEA MINIMUM OF #10AWG WHEN NOT EXPOSED TO DAMAGE (#6AWG SHALL BE USED WHEN EXPOSED TO DAMAGE). 12. GROUNDING AND BONDING CONDUCTORS, IF INSULATED, SHALL BE COLOR CODED GREEN (OR MARKED GREEN IF #4 AWG OR LARGER) 13. ALL CONDUIT BETWEEN THE UTILITY AC DISCONNECT AND THE POINT OF CONNECTION SHALL HAVE GROUNDED BUSHINGS AT BOTH ENDS. 14. SYSTEM GEC SIZED ACCORDING TO [NEC 690.471.. [NEC TABLE 250.661, DC SYSTEM GEC SIZED ACCORDING TO [NEC 250 1661, MINIMUM #8AWG WHEN INSULATED, #6AWG WHEN EXPOSED TO DAMAGE. 15. EXPOSED NON-CURRENT CARRYING METAL PARTS OF MODULE FRAMES, EQUIPMENTS, AND CONDUCTOR ENCLOSURES SHALL BE GROUNDED IN ACCORDANCE WITH 250.134 OR 250.136(A) REGARDLESS OF VOLTAGE. WIRING & CONDUIT NOTES 1. ALL CONDUIT SIZES AND TYPES, SHALL BE LISTED FOR ITS PURPOSE AND APPROVED FOR THE SITE APPLICATIONS 2. BOLTED CONNECTION REQUIRED IN DC DISCONNECTS ON THE WHITE GROUNDED CONDUCTOR (USE POLARIS BLOCK OR NEUTRAL BAR) 3. ANY CONNECTION ABOVE LIVE PARTS MUST BE WATERTIGHT. REDUCING WASHERS DISALLOWED ABOVE LIVE PARTS, MEYERS HUBS RECOMMENDED 4. UV RESISTANT CABLE TIES(NOT ZIP TIES) USED FOR PERMANENT WIRE MANAGEMENT OFF THE ROOF SURFACE IN ACCORDANCE WITH NEC 110.2,110.3(A -B). 300.4 5. SOLADECK JUNCTION BOXES MOUNTED FLUSH W/ROOF SURFACE TO BE USED FOR WIRE MANAGEMENT AND AS FLASHED ROOF PENETRATIONS FOR INTERIOR CONDUIT RUNS. & ALL PV CABLES AND HOMERUN WIRES BE TYPE USE -2. AND SINGLE -CONDUCTOR CABLE LISTED AND IDENTIFIED AS PV WIRE, TYPE TC -ER, OR EQUIVALENT: ROUTED TO SOURCE CIRCUIT COMBINER BOXES AS REQUIRED 7. ALL CONDUCTORS AND OCPD SIZES AND TYPES SPECIFIED ACCORDING TO [NEC CONnI ICTOR 1;17F CAI CHI ATIONS MICROINVERTERTO MAX. SHORT CIRCUIT CURRRENT (ISC) = 9.0AAC JUNCTION BOX (1) MAX. CURRENT (ISC X1.25) = 11.3 A AC CONDUCTOR (TC -ER, COPPER (90°C)) = 12 AWG CONDUCTOR RATING = 30 A AMB. TEMP. AMP. CORRECTION = 0.96 ADJUSTED AMP. = 28.8 > 11.3 JUNCTION BOX TO MAX. SHORT CIRCUIT CURRRENT (ISC) = 9.0 A AC BOX (2) MAX. CURRENT (ISC X1.25) = 11.3 A AC (JUNCTION CONDUCTOR (UF -B, COPPER (60°C)) = 12 AWG CONDUCTOR RATING= 20A CONDUIT FILL DERATE = 1 AMB. TEMP. AMP. CORRECTION = 0.96 ADJUSTED AMP. = 19.2 > 11.3 JUNCTION BOX TO MAX. SHORT CIRCUIT CURRRENT (ISC) = 9.0 A AC COMBINER BOX (3) MAX. CURRENT (ISC X1.25) = 11.3 A AC CONDUCTOR (UF -B, COPPER (60°C)) = 12 AWG CONDUCTOR RATING= 20A CONDUIT FILL DERATE = 0.8 AMB. TEMP. AMP. CORRECTION = 0.96 ADJUSTED AMP. = 15.36 > 11.3 COMBIN ER BOX TO INVERTER RATED AMPS = 18.0 A AC MAIN PV OCPD (15) MAX. CURRENT ( RATED AMPS X1.25) = 22.5 A AC CONDUCTOR (THWN-2, COPPER (75°C TERM.)) = 10 AWG CONDUCTOR RATING= 35 A CONDUIT FILL DERATE = 1 AMB. TEMP. AMP. CORRECTION = 0.96 ADJUSTED AMP. = 33.6 > 22.5 690.8] FOR MULTIPLE CONDUCTORS & ALL PV DC CONDUCTORS IN CONDUIT EXPOSED TO SUNLIGHT SHALL BE INSTALLED AT LEAST 7/8" ABOVE THE ROOF SURFACE AND DERATED ACCORDING TO [NEC TABLE 310.15 (B)(2)(a). NEC TABLE 310.15(B)(3)(a),& NEC 310.15(B)(3)(c)]. 9. EXPOSED ROOF PV DC CONDUCTORS SHALL BE USE -2, 90°C RATED, WET AND UV RESISTANT, AND UL LISTED RATED FOR 600V, UV RATED SPIRAL WRAP SHALL BE USED TO PROTECT WIRE FROM SHARP EDGES 10. PHASE AND NEUTRAL CONDUCTORS SHALL BE DUAL RATED THHN/THWN-2 INSULATED, 90°C RATED, WET AND UV RESISTANT. RATED FOR 600V 11. 4 -WIRE DELTA CONNECTED SYSTEMS HAVE THE PHASE WITH THE HIGHER VOLTAGE TO GROUND MARKED ORANGE OR IDENTIFIED BY OTHER EFFECTIVE MEANS. 12. ALL SOURCE CIRCUITS SHALL HAVE INDIVIDUAL SOURCE CIRCUIT PROTECTION 13. VOLTAGE DROP LIMITED TO 2% FOR DC CIRCUITS AND 3% FOR AC CIRCUITS 14. NEGATIVE GROUNDED SYSTEMS DC CONDUCTORS SHALL BE COLOR CODED AS FOLLOWS: DC POSITIVE- RED (OR MARKED RED).. DC NEGATIVE- GREY (OR MARKED GREY) 15. POSITIVE GROUNDED SYSTEMS DC CONDUCTORS COLOR CODED: DC POSITIVE- GREY (OR MARKED GREY), DC NEGATIVE- BLACK (OR MARKED BaACK 16, AC CONDUCTORS >4AWG COLOR CODED OR MARKED: PHASE A OR L1- BLACK, PHASE B OR L2- RED, PHASE C OR L3- BLUE, NEUTRAL- WHITE/GRAY USE -2 IS NOT INDOOR RATED BUT PV CABLE IS RATED THWN/THWN-2 AND MA BE USED INSIDE " USE -2 IS AVAILABLE AS UV WHITE 17. RIGID CONDUIT, IF INSTALLED, (AND/OR NIPPLES) MUST HAVE A PULL BUSH PROTECT WIRES. 18. IF CONDUIT DETERMINED TO BE RAN THROUGH ATTIC IN FIELD THEN CONDUIT WILL BE EITHER EMT FMC, OR MC CABLE IF DC CURRENT COMPLYING WITH NEC 690.31, NEC 250.11800). DISCONNECTING MEANS SHALL COMPLY WITH 690.13 AND 690.15 19 CONDUIT RAN THROUGH ATTIC WILL BE AT LEAST 18" BELOW ROOF SURFACE COMPLYING WITH NEC 230.6(4) AND SECURED NO GREATER THAN 6' APART PER NEC 330.30(8). *10�1* BLUE RAVEN 1403 N RESEARCH WAY, BUILDING J OREM, UT 84097 800-377-4480 WWW. BLU E RAVENSOLAR.COM CONFIDENTIAL -THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUERAVENSOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLAR LLC NABCEP`, CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 N N U) Y L U (D O > m W E � N CB cr) U) -T M cy') CD O O C6 O O U N 70 O U 0> Y d' tf� W N 0 W U) U 0 NG BY DIN ENGINEERING nuary 23, 2020 PROJECT NUMBER 70881689 SHEET NAME ELEC. CALCS. PAGE NUMBER REVISION PV6 0 e ELECTRIC SHOCK HAZARD TERMINALS ON THE LINE AND LOAD SIDES MAY BE ENERGIZED — IN THE OPEN POSITION � . DIRECT ,. PHOTOVOLTAIC POWER SOURCE I MAXIMUM VOLTAGE VDC MAX CIRCUIT CURRENT AMPS i vilt 1 I 1 RATED AC DUTPUTCURRENT A NOMINAL OPERATING AC VOLTAGE V .LWARNING DUAL POWER SUPPLY SOURCES: UTILITY GRID AND PV SOLAR ELECTRIC SYSTEM ,!WARNING INVERTER OUTPUT CONNECTION DO NOT RELOCATE THIS OVERCURRENT DEVICE A THIS EQUIPMENT FED BY MULTIPLE SOURCES. TOTAL RATING OF ALL OVERCURRENT DEVICES. EXCLUDING MAIN SUPPLY OVERCURRENT DEVICE. SHALL NOT EXCEED AMPACITY OF BUSBAR. PHOTOVOLTAIC SYSTEM CONNECTED PV AC DISCONNECT LABEL 1 FOR PV DISCONNECTING MEANS WHERE ALL TERMINALS OF THE DISCONNECTING MEANS MAY BE ENERGIZED IN THE OPEN POSITION [NEC 690.13(B). NEC 705 22] LABEL 2 AT EACH DC DISCONNECTING MEANS, INCLUDING THE DC DISCONNECT AT THE INVERTER. [NEC 690.53, NEC 690.13(B)] LABEL 3 AT POINT OF INTERCONNECTION. MARKED AT AC DISCONNECTING MEANS [NEC 690 54. NEC 690.13 (B)] LABEL 4 AT POINT OF INTERCONNECTION FOR EQUIPMENT CONTAINING OVERCURRENT DEVICES IN CIRCUTS SUPPLYING POWER TO A BUSBAR OR CONDUCTOR SUPPLIED FORM MULTIPLE SOURCES, EACH SERVICE EQUIPMENT AND ALL ELECTRIC POWER PRODUCTION SOURCE LOCATIONS [NEC 705.12(B)(3)] LABEL 5 PLACED ADJACENT TO THE BACK -FED BREAKER FROM THE INVERTER IF TIE IN CONSISTS OF LOAD SIDE CONNECTION TO BUSBAR. [NEC 705.12(B)(2)(3)(b)] LABEL 6 (ONLY IF 3 OR MORE SUPPLY SOURCES TO A BUSBAR) SIGN LOCATED AT LOAD CENTER IF IT CONTAINS 3 OR MORE POWER SOURCES. [NEC 705.12(B)(2)(3)(C)] LABEL 10 SIGN LOCATED AT RAPID SHUT DOWN DISCONNECT SWITCH [NEC 690.56(C)(3)]. LABEL 12 PLACARD TO BE PLACED AT THE MAIN BILLING METER PER XCEL ENERGY. LABEL 13 PLACARD TO BE PLACED AT AC DISCONNECT PER XCEL ENERGY. SOLAR PV SYSTEM EQUIPPED WITH RAPID SHUTDOWN TURN RAPID SHUTDOWN SWITCH TO THE 'OFF' POSITION TO mmae:mc SHUT DOWN PV SYSTEM "'1PA�••` AND REDUCE SHOCK HAZARD ,_,_ INTHEARRAY LABELING NOTES. 1. LABELS CALLED OUT ACCORDING TO ALL COMMON CONFIGURATIONS ELECTRICIAN TO DETERMINE EXACT REQUIREMENTS IN THE FIELD PER CURRENT NEC AND LOCAL CODES AND MAKE APPROPRIATE ADJUSTMENTS. 2 LABELING REQUIREMENTS BASED ON THE 2017 NATIONAL ELECTRIC CODE OSHA STANDARD 19010.145, ANSI Z535. 3, MATERIAL BASED ON THE REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION. 4 LABELS TO BE OF SUFFICIENT DURABILITY TO WITHSTAND THE ENVIRONMENT INVOLVED [NEC 110.21] 5, LABELS TO BE A MINIMUM LETTER HEIGHT OF 3/8", WHITE ON RED BACKGROUND: REFLECTIVE AND PERMANENTLY AFFIXED [IFC 605.11 1 11 LABEL 7 AT DIRECT-CURRENT EXPOSED RACEWAYS. CABLE TRAYS COVERS AND ENCLOSURES OF JUNCTION BOXES, AND OTHER WIRING METHODS: SPACED AT MAXIMUM 1OFT SECTION OR WHERE SEPARATED BY ENCLOSURES, WALLS.. PARTITIONS, CEILINGS. OR FLOORS. [NEC 690.31(G)(3&4)] LABELS FOR PV SYSTEMS THAT SHUT DOWN THE ARRAY AND CONDUCTORS LEAVING THE ARRAY: SIGN TO BE LOCATED ON OR NO MORE THAN 3 FT AWAY FROM SERVICE DISCONNECTING MEANS TO WHICH THE PV SYSTEMS ARE CONNECTED AND SHALL INDICATE THE LOCATION OF ALL IDENTIFIED RAPID SHUTDOWN SWITCHES IF NOT AT THE SAME LOCATION. [NEC 690-56(C)(1)(A)] LABEL9 FOR PV SYSTEMS THAT ONLY SHUT DOWN CONDUCTORS LEAVING THE ARRAY: SIGN TO BE LOCATED ON OR NO MORE THAN 3 FT AWAY FROM SERVICE DISCONNECTING MEANS TO WHICH THE PV SYSTEMS ARE CONNECTED AND SHALL INDICATE THE LOCATION OF ALL IDENTIFIED RAPID SHUTDOWN SWITCHES IF NOT AT THE SAME LOCATION. [NEC 690.56(C)(1)(B)] LABEL II NO DC, WIRES PRESENT SIGN LOCATED AT AC COMBINER BOX FOR ALL MICRO -INVERTER / AC MODULE RAPID SHUTDOWN TEST INSTALLS (IF APPLICABLE). NOT REQUIRED LABELING DIAGRAM FOR MICRO INV MAIN SERVICE PANEL SOLAR PV SYSTEM EQUIPPED WITH RAPID SHUTDOWN MAIN SERVICE EQUIPMENT LOCATION IF ALL MAIN DISTRIBUTION UTILITYDIBCONNECT(B) TO THE'OFr POSITION POWERTOTHIS BUILDING IS ALSO SUPPLIED • SHUT DOWN CONDUCTORS FROM A ROOF MOUNTED SOLAR ARRAY WITH A RAPID SHUTDOWN DISCONNECTING MEANS OJrSDE THE ARMY GROUPED AND LABELED WITHIN LINE OF SITE CONDUCTORSWRIN THEARRAYREMAJN AND 10 Fr OF THIS LOCATION. ENERGIZED, SUNLIGHT LABELING NOTES. 1. LABELS CALLED OUT ACCORDING TO ALL COMMON CONFIGURATIONS ELECTRICIAN TO DETERMINE EXACT REQUIREMENTS IN THE FIELD PER CURRENT NEC AND LOCAL CODES AND MAKE APPROPRIATE ADJUSTMENTS. 2 LABELING REQUIREMENTS BASED ON THE 2017 NATIONAL ELECTRIC CODE OSHA STANDARD 19010.145, ANSI Z535. 3, MATERIAL BASED ON THE REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION. 4 LABELS TO BE OF SUFFICIENT DURABILITY TO WITHSTAND THE ENVIRONMENT INVOLVED [NEC 110.21] 5, LABELS TO BE A MINIMUM LETTER HEIGHT OF 3/8", WHITE ON RED BACKGROUND: REFLECTIVE AND PERMANENTLY AFFIXED [IFC 605.11 1 11 LABEL 7 AT DIRECT-CURRENT EXPOSED RACEWAYS. CABLE TRAYS COVERS AND ENCLOSURES OF JUNCTION BOXES, AND OTHER WIRING METHODS: SPACED AT MAXIMUM 1OFT SECTION OR WHERE SEPARATED BY ENCLOSURES, WALLS.. PARTITIONS, CEILINGS. OR FLOORS. [NEC 690.31(G)(3&4)] LABELS FOR PV SYSTEMS THAT SHUT DOWN THE ARRAY AND CONDUCTORS LEAVING THE ARRAY: SIGN TO BE LOCATED ON OR NO MORE THAN 3 FT AWAY FROM SERVICE DISCONNECTING MEANS TO WHICH THE PV SYSTEMS ARE CONNECTED AND SHALL INDICATE THE LOCATION OF ALL IDENTIFIED RAPID SHUTDOWN SWITCHES IF NOT AT THE SAME LOCATION. [NEC 690-56(C)(1)(A)] LABEL9 FOR PV SYSTEMS THAT ONLY SHUT DOWN CONDUCTORS LEAVING THE ARRAY: SIGN TO BE LOCATED ON OR NO MORE THAN 3 FT AWAY FROM SERVICE DISCONNECTING MEANS TO WHICH THE PV SYSTEMS ARE CONNECTED AND SHALL INDICATE THE LOCATION OF ALL IDENTIFIED RAPID SHUTDOWN SWITCHES IF NOT AT THE SAME LOCATION. [NEC 690.56(C)(1)(B)] LABEL II NO DC, WIRES PRESENT SIGN LOCATED AT AC COMBINER BOX FOR ALL MICRO -INVERTER / AC MODULE RAPID SHUTDOWN TEST INSTALLS (IF APPLICABLE). NOT REQUIRED LABELING DIAGRAM FOR MICRO INV MAIN SERVICE PANEL A WARNING POWER TO THIS BUILDING IS ALSO SUPPLIED FROM MAIN DISTRIBUTION UTILITY DISCONNECT LOCATED &WARINING POWER TO THIS BUILDING IS ALSO SUPPLIED FROM ROOF MOUNTED SOLAR ARRAY. SOLAR ARRAY RAPID SHUTDOWN DISCONNECT IS LOCATED OUTSIDE NEXT TO UTILITY METER. LABEL 16 PERMANENT DIRECTORY TO BE LOCATED AT SOLAR ARRAY RAPID SHUTDOWN SWITCH DENOTING THE LOCATION OF THE SERVICE EQUIPMENT LOCATION IF SOLAR ARRAY RAPID SHUT DOWN DISCONNECT SWITCH IS NOT GROUPED AND WITHIN LINE OF SITE OF MAIN SERVICE DISCONNECTING MEANS. [NEC 705.101 LABEL 17 PERMANENT DIRECTORY TO BE LOCATED AT MAIN SERVICE EQUIPMENT DENOTING THE LOCATION OF THE PV RAPID SHUTDOWN SYSTEM DISCONNECTING MEANS IF SOLAR ARRAY RAPID SHUT DOWN DISCONNECT SWITCH IS NOT GROUPED AND WITHIN LINE OF SITE OF MAIN SERVICE DISCONNECTING MEANS. [NEC 705.10, NEC 690-56(C)(1)] BLUE RAVEN 1403 N RESEARCH WAY. BUILDING J OREM. UT 84097 800-377-4480 WWW. BLUERAVENSOLAR.COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUERAVENSOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT. WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLARLLC. NABCEP' CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 EXISTING SUB PANEL PV COMBINER OO8 (IF WHERE POINT OF SUBPANEL - INTERCONNECTION AC DISCONNECT IF USED TO COMBINE AC JUNCTION BOX 12 13 IS MADE) (IF REQ / INSTALLED) PV OUTPUT CIRCUITS OR AC COMBINER BOX o0 0 0 0 C'1 0 O&O /� � ° D ° IF BREAKER USED 13 1 D (4) O °° O 15 OR 17 O&O 00 07 OR PLACARD OO o IF BREAKER USE Z 0 _ (ONLY IF PV 0 O O W INTERCONNECTION F (D —0 N CONSISTS OF LOAD < U SIDE BREAKER) U) LABELING DIAGRAM FOR STRING INV. / DC OPTIMIZER INV. Y _0 W LL 5 MAIN SERVICE PANEL Z (D W C) EXISTING SUB PANEL PV COMBINER '^, ' NVERTER (S) — m � 13 (IF WHERE POINT OF SUBPANEL - E � = OINTERCONNECTION AC DISCONNECT IF USED TO COMBINE (0 (+D U 12 IS MADE) (IF REQ / INSTALLED) PV OUTPUT CIRCUITS co co Q O3 & O4 G BY IF BREAKER USED 0 O O Q oRAu� DIN ENGINEERING DOD 8 OR 9 O&O 16 13 O 15 OR 17 IF BREAKER USE Of nc , JUNCTION BOX Tty ;7�pj OR P5 CARD a o O �i OR COMBINER BOX 2 anuary 23, 2020 (ONLY IF PV (ONLY IF PV10 1 � ��51 ROJEcr NUMBER INTERCONNECTIO INTERCONNECTION CONSISTS OF LOA SIDE BREAKER) CONSISTS OF LOA 11 O O7 Ut`a, 70881689 SIDE BREAKER) INTEGRATED DC DISCONNECT SHEET NAME LABELS 'ELECTRICAL DIAGRAMS SHOWN ABOVE IS FOR LABELING PURPOSES ONLY. NOT AN ACTUAL P,EPRESENATION OF EQUIPMENT AND CONNECTIONS TO BE INSTALLED LABEL LOCATIONS PRESENTED MAY VERY DEPENDING ON TYPE OF INTERCONNECTION METHOD AND LOCATION PRESENTED ON PV5 OF 3 LINE (DIAGRAM. PV5 LINE DIAGRAM TO REFLECT ACTUAL REPRESENTATION OF PROPOSED SCOPE OF WORK PAGE NUMBER REVISION PV8 0 LABEL 15 A WARNING PERMANENT DIRECTORY TO BE LOCATED AT MAIN SERVICE EQUIPMENT LOCATION IF ALL MAIN DISTRIBUTION UTILITYDIBCONNECT(B) ELECTRICAL POWER SOURCE DISCONNECTING POWERTOTHIS BUILDING IS ALSO SUPPLIED MEANS (SOLAR ARRAY RAPID SHUTDOWN FROM A ROOF MOUNTED SOLAR ARRAY WITH A RAPID SHUTDOWN DISCONNECTING MEANS SWITCH) ARE GROUPED AND IN LINE OF SITE OF GROUPED AND LABELED WITHIN LINE OF SITE MAIN SERVICE DISCONNECTING MEANS. AND 10 Fr OF THIS LOCATION. [NEC 690.56(C) & NEC 705,10]. A WARNING POWER TO THIS BUILDING IS ALSO SUPPLIED FROM MAIN DISTRIBUTION UTILITY DISCONNECT LOCATED &WARINING POWER TO THIS BUILDING IS ALSO SUPPLIED FROM ROOF MOUNTED SOLAR ARRAY. SOLAR ARRAY RAPID SHUTDOWN DISCONNECT IS LOCATED OUTSIDE NEXT TO UTILITY METER. LABEL 16 PERMANENT DIRECTORY TO BE LOCATED AT SOLAR ARRAY RAPID SHUTDOWN SWITCH DENOTING THE LOCATION OF THE SERVICE EQUIPMENT LOCATION IF SOLAR ARRAY RAPID SHUT DOWN DISCONNECT SWITCH IS NOT GROUPED AND WITHIN LINE OF SITE OF MAIN SERVICE DISCONNECTING MEANS. [NEC 705.101 LABEL 17 PERMANENT DIRECTORY TO BE LOCATED AT MAIN SERVICE EQUIPMENT DENOTING THE LOCATION OF THE PV RAPID SHUTDOWN SYSTEM DISCONNECTING MEANS IF SOLAR ARRAY RAPID SHUT DOWN DISCONNECT SWITCH IS NOT GROUPED AND WITHIN LINE OF SITE OF MAIN SERVICE DISCONNECTING MEANS. [NEC 705.10, NEC 690-56(C)(1)] BLUE RAVEN 1403 N RESEARCH WAY. BUILDING J OREM. UT 84097 800-377-4480 WWW. BLUERAVENSOLAR.COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUERAVENSOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNEC TION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT. WITHOUT THE WRITTEN PERMISSION OF BLUERAVENSOLARLLC. NABCEP' CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 EXISTING SUB PANEL PV COMBINER OO8 (IF WHERE POINT OF SUBPANEL - INTERCONNECTION AC DISCONNECT IF USED TO COMBINE AC JUNCTION BOX 12 13 IS MADE) (IF REQ / INSTALLED) PV OUTPUT CIRCUITS OR AC COMBINER BOX o0 0 0 0 C'1 0 O&O /� � ° D ° IF BREAKER USED 13 1 D (4) O °° O 15 OR 17 O&O 00 07 OR PLACARD OO o IF BREAKER USE Z 0 _ (ONLY IF PV 0 O O W INTERCONNECTION F (D —0 N CONSISTS OF LOAD < U SIDE BREAKER) U) LABELING DIAGRAM FOR STRING INV. / DC OPTIMIZER INV. Y _0 W LL 5 MAIN SERVICE PANEL Z (D W C) EXISTING SUB PANEL PV COMBINER '^, ' NVERTER (S) — m � 13 (IF WHERE POINT OF SUBPANEL - E � = OINTERCONNECTION AC DISCONNECT IF USED TO COMBINE (0 (+D U 12 IS MADE) (IF REQ / INSTALLED) PV OUTPUT CIRCUITS co co Q O3 & O4 G BY IF BREAKER USED 0 O O Q oRAu� DIN ENGINEERING DOD 8 OR 9 O&O 16 13 O 15 OR 17 IF BREAKER USE Of nc , JUNCTION BOX Tty ;7�pj OR P5 CARD a o O �i OR COMBINER BOX 2 anuary 23, 2020 (ONLY IF PV (ONLY IF PV10 1 � ��51 ROJEcr NUMBER INTERCONNECTIO INTERCONNECTION CONSISTS OF LOA SIDE BREAKER) CONSISTS OF LOA 11 O O7 Ut`a, 70881689 SIDE BREAKER) INTEGRATED DC DISCONNECT SHEET NAME LABELS 'ELECTRICAL DIAGRAMS SHOWN ABOVE IS FOR LABELING PURPOSES ONLY. NOT AN ACTUAL P,EPRESENATION OF EQUIPMENT AND CONNECTIONS TO BE INSTALLED LABEL LOCATIONS PRESENTED MAY VERY DEPENDING ON TYPE OF INTERCONNECTION METHOD AND LOCATION PRESENTED ON PV5 OF 3 LINE (DIAGRAM. PV5 LINE DIAGRAM TO REFLECT ACTUAL REPRESENTATION OF PROPOSED SCOPE OF WORK PAGE NUMBER REVISION PV8 0 Enphase Microinverters OV� To Learn more about Enphase offerings, visit enphase,c=gym The high-pc-,vered smart grid -ready Erfphase IQ , . - a^d `7iphase lis dramatically simplify t^e ns`ailation process v h e achieving the highest system ef`iciency. Part of the Enphase IQ System, the IQ 7 and IQ + M icroi nverters integrate with the En g^ase IQ Envoy-, Enphase IQ Battery-, a-; ;he E^phase Enlighten- mor.itoring and a^alys s sottware. iQ Series Microinvesters exte^d he reliability standards set forts^ by p, evious generations and undergo over a million hours of power -can testing, enabling Enphase to provide a- =ndustry=leading warranty of up to 25 years. Easy to Install Lightwe"sght and sirnple Faster instakatson wfth irnprorved, tighter t-wo-wire cabling Built-in rapid shutdown compliant t,NEC 20114 & 2017) Productive and Reliable Optirrized for high p0%vered 60-cetl and 72 -cell* modules More than a nnilliort hours of testing Ctass li double -insulated enclosure UL listed Smart Grid Ready -- Complies with; advanced grid suppom voltage and sseWency ride -through requirerrItents Rernotely updates to respond to changing grid requirtinrie-rits Configurable for varying grid profiles Meets CA Rifle 21 ('UL 1741 -SA.) The it0 7+ Micm is required# fo support 72 -calf rncdules_ *NW BLUE RAVEN 1403 N RESEARCH WAY. BUILDING J Enphase IQ 7 and IQ 7+ Microinverters OREM,UT84097 -4480 INPUT DATA (DC) IQ7-60-2-US 1 IQ7-60-8-US I07PLUS-72-2-US / IQ7PLUS-72-B-US UERA ENSO .�___._�..�...m..._._.,.,.,.-...__.._a.__.______...,-.....:._.__._....__,.,._,...e....._____._..,.._,,..,.w.__.._.._w...._.__.,_...._,._.�_,...-.__.,_.w._.. WWW.BLUERAVENSOLAR.COM Commonly used module pairings" 235 W - 350 W + 235 W- 440 W + Module compatibility 60 -cell PV modules only 60 -cell and 72 -cell PV modules CONFIDENTIAL - THE INFORMATION Maximum input DC voltage 48V 60V HEREIN CONTAINED SHALL NOT BE OF Peak power tracking voltage 27 V -37 V 27 V - 45 V USED FOR THE BENEFIT V 9 ANYONE EXCEPT BLUE RAVEN Operating range 16 V - 48 V 16V -60V SOLAR NOR SHALL IT BE Min/Max start voltage 22 V / 48 V 22V 1 60 V DISCLOSED IN WHOLE OR IN PART Max DC short circuit current (module Isc) 15 A 15A TO OTHERS OUTSIDE RECIPIENTS ORGAN, EXCEPT IN Overvoltage class DC port II II CONNECTION ON WITH THE SALE AND DC port backfeed current 0 A 0 A USE OF THE RESPECTIVE PV array configuration 1 x 1 ungrounded array; No additional DC side protection required, EQUIPMENT, WITHOUT THE AC side protection requires max 20A per branch circuit WRITTEN PERMISSION OF BLUE OUTPUT DATA (AC) IQ 7 Microinverter IQ 7+Microinverter RAVEN SOLAR LLC. Peak output power 250 VA 295 VA Maximum continuous output power 240 VA 290 VA ^ 1 of Nominal (L -L) voltage/rangez 240 V/ 208V/ 240 V i 208 V 1 t �t f i 211-264 V 1 83-229 V 211-264 V 183-229 V CERTIFIED Maximum continuous output current 1.0 A (240 V) 1.15 A (208 V) 1.21 A (240 V) 1.39 A (208 V) Nominal frequency 60 Hz 60 Hz PV INSTALLATION Extended frequency range 47 - 68 Hz 47 - 68 Hz PROFESSIONAL AC short circuit fault current over 3 cycles 5.8 Arms 5.8 Arms Scott Gurney Maximum units per 20 A (L-L)branch circuit' 16 (240 VAC) 13 (208 VAC) 13 (240 VAC) 11 (208 VAC) # PV -011719-015866 Overvoltage class AC port III III CONTRACTOR: AC port backfeed current 0 A 0 A BRS FIELD OPS Power factor setting 1.0 1.0 38 Power factor (adjustable) 0.7 leading ... 0.7 lagging 0.7 leading ... 0.7 lagging 385.498.6700 EFFICIENCY @240 V @208 V @240 V @208 V Peak CEC efficiency 97.6 So 97.6% 97.5% 97.3% CEC weighted efficiency 97.0% 9 7. 0 °r.; 97.0 % 97.0 MECHANICAL DATA Ambient temperature range -40°C to +65°C Relative humidity range 4`* to 100 (condensing) Connector type (IQ7-60-2-US & IQ7PLUS-72-2-US) MC4 (or Amphenol H4 UTX with additional Q -DCC -5 adapter) Connector type (IQ7-60-B-US & IQ7PLUS-72-B-US) Friends PV2 (MCA intermateable). Adaptors for modules with MCA or UTX connectors: PV2 to MC4: order ECA -S20 -S22 PV2 to UTX: order ECA -S20 -S25 Dimensions (WXHXD) 212 mm x 175 mm x 30.2 mm (without bracket) Weight 1.08 kg (2.38 lbs) Cooling Natural convection- No fans Approved for wet locations Yes Pollution degree PD3 Enclosure Class II double -insulated, corrosion resistant polymeric enclosure Environmental category 1 UV exposure rating NEMA Type 61 outdoor FEATURES Communication _ Power Line Communication (PLC) Monitoring Enlighten Manager and MvEnlighten monitoring options. Both options require installation of an Enphase IQ Envoy. City of Disconnecting means The AC and DC connectors have been evaluated and approved by UL for use as the load -break disconnect required by NEC 690. Compliance CA Rule 21 (UL 1741 -SA) idge_,r� UL 62109-1, UL1741iIEEE1547, FCC Part 15 Class B, ICES -0003 Class B, Uil z1s(/ CAN/CSA-C22.2 NO. 107.1-01 &n., ion This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC -2014 and � NEC -2017 section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors, when installed according manufacturer's instructions. 1. No enfcnced DC,%C rata See the: or -pat h_I ly calculaAa ai hep_:: /enf2j �E_gom'en-t �lpport/module-c4rti ilifX. 2. Nominal voltage range can he. extended bevond norirnal'if ser a -red by the ulTtV= 3. Lkmits may var/. Refer to local requ•rements to define Ilia nw,tb i of nu ;roinverters per branch in your area. SHEET NAME To learn more about Enphase offerings, visit enphase.corr. ENPHASEI SPEC SHEET r 20 a g;; c. ?i: "a c:r t, PAGE NUMBER REVISION SS 0 nphase F Q �' i,, u m,D- n e r 3 (X-IQ-AM1-240-3) !41 K LISTED To learn more about Enphase offerings, visit enphase.com NOW - BLUE RAVEN Enphase IQ Combiner 3 1403 N RESEARCH WAY, BUILDING J MODEL NUMBER OREM. UT 84097 IQ Combiner 3 X -IQ -AM 1-240-3 IQ Combiner 3 with Enphase IQ Envoy' printed circuit board for integrated revenue grade PV 800-377-4480 production metering (ANSI C12.20 0.550 and optional* consumption monitoring (+/-2.5%). WWW.BLUERAVENSOLAR.COM ACCESSORIES and REPLACEMENT PARTS (not included, order separately) CONFIDENTIAL -THE INFORMATION Enphase Mobile Connect' HEREIN CONTAINED SHALL NOT BE CELLMODEM-03 (4G / 12 -year data plan) Plug and play industrial grade cellular modem with data plan for systems up to 60 USED FOR THE BENEFIT OF CELLMODEM-01 (3G / 5 -year data plan) microinverters. (Available in the US, Canada, Mexico, Puerto Rico, and the US Virgin Islands, ANYONE EXCEPT BLUE RAVEN CELLMODEM-Ml (4G based LTE -M 5-yeardata plan) where there is adequate cellular service in the installation area.) SOLAR NOR SHALL IT BE Tice Enphase 10 Combiner 3 vv*ith Enphase Consumption Monitoring* CT DISCLOSED IN WHOLE OR IN PART CT -200 -SPLIT Split core current transformers enable whole home consumption metering (+/- 2.5%). TO OTHERS OUTSIDE RECIPIENTS IQ Envoy- conso *dates nterconnect on ORGANIZATION. EXCEPT IN Circuit Breakers Supports Eaton BR210, BR215, BR220, BR230, BR240, BR250, and BR260 circuit breakers. CONNECTION WITH THE SALE AND BRK-10A-2-240 Circuit breaker, 2 pole, IOA, Eaton BR210 USE OF THE RESPECTIVE 2 pment nto a s�ng e enc osure and BRK-15A-2-240 Circuit breaker, 2 pole, 15A, Eaton BR215 EQUIPMENT, WITHOUT THE stream 'nes PV and storage nsta at ons by BRK-20A-2P-240 Circuit breaker, 2 pole, 20A, Eaton BR220 WRITTEN PERMISSION OF BLUE EPLC-01 Power line carrier (communication bridge pair), quantity 2 RAVEN SOLAR LLC. prov d ng a cons stent, pre-wTed so ut on `Or XA-PLUG-120-3 Accessory receptacle for Power Line Carrier in IQ Combiner 3 (required for EPLC-01) res dent 2 app c2tons. it o"ers up to our ABC E P XA-ENV-PCBA-3 Replacement IQ Envoy printed circuit board (PCB) for Combiner 3 NA *'/BCEP rL ELECTRICAL SPECIFICATIONS 2-po e *nput C*rCUAS and Eaton BR seres Rating Continuous duty CERTIFIED IFIED busb2r 2ssemb y. System voltage 120/240 VAC, 60 Hz PV INSTALLATION Eaton BR series busbar rating 125 A PROFESSIONAL Scoff Gurney Max. continuous current rating (output to grid) 65A # PV -011719-015888 Max. fuselcircuit rating (output) 90A CONTRACTOR: Branch circuits (solar and/or storage) Up to four 2 -pole Eaton BR series Distributed Generation (DG) breakers only (not included) BRS FIELD OPS Max. continuous current rating (input from PV) 64A 385.498,6700 Max. total branch circuit breaker rating (input) SOA of distributed generation / 90A with IQ Envoy breaker included Smart Production Metering CT 200 A solid core pre-installed and wired to IQ Envoy Includes IQ Envoy for communication MECHANICAL DATA and control Dimensions (WxHxD) 49.5 x 37.5 x 16.8 cm (19.5" x 14.75" x 6.63'). Height is 21.06'(53.5 cm with mounting brackets). Flexible networking supports Wi-Fi, Weight 7.5 kg {16.5 lbs) Ethernet, or cellular Optional AC receptacle available for PLC Ambient temperature range -40°C to +460 C (-400 to 1150 F) bridge Cooling Natural convection, plus heat shield Provides production metering and optional Enclosure environmental rating Outdoor, NRTL-certified, NEMA type 3R, polycarbonate construction consumption monitoring Wire sizes 20 A to 50 A breaker inputs: 14 to 4 AWG copper conductors 60 A breaker branch input: 4 to 1/0 AWG copper conductors Main lug combined output: 10 to 2>0 AWG copper conductors Neutral and ground i 14 to 1/0 copper conductors Simple Always follow local code requirements for conductor sizing. Reduced size from previous combiner Altitude To 2000 meters (6,560 feet) Centered mounting brackets support single INTERNET CONNECTION OPTIONS stud mounting Integrated Wi-F! 802.11b/gfn Supports back and side conduit entry Ethernet Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included) Up to four 2 -pole branch circuits for 240 VAC Cellular Optional, CELLMODEM-01 (3G) or CELLMODEM-03 (4G) or CELLMODEM-Ml (4G based LTE -M) plug-in breakers (not included) (not included) 80 A total PV or storage branch circuits COMPLIANCE Compliance, Combiner UL 1741 CAN/CSA C22.2 No. 107.1 of Reliable 47 CFR, Part 15, Class B, ICES 003 Production metering: ANSI C12.20 accuracy class 0.5 (PV production) Durable NRTL-certified NEMA type Compliance, IQ Envoy UL 60601-1/CANCSA 22,2 No. 61010-1 3R enclosure Consumption monitoring is required for Enphase Storage Systems. Five-year warranty Ivision UL listed To learn more about Enphase offerings, visit enphase.com ENPHASE. ENPHASE. SHEET NAME SPEC SHEET PAGE NUMBER REVISION SS 0 Safety n,r Resistance to salt mist corrosion at your request Anti -PID products using advanced module technology Performance High efficiency and enhanced module durability Resistance to ammana corrosion at your request e World 1 st company to pass 'Thresher Test' and "On-site Power Measurement Validation" certificate Outsta,idug pourer output capability at low irradiance a;^s ars 4+114,s }, 9a.Yax rx'aUpe� Si 96bax def 1 aaA ori n9c' 89 ffi4 Guarantee at product 10YEARS material andworkmatsNp 6 linear power output warranty YEARS 91 s Bankable products Withstand up to 2400Pa wind and 5400Pa snow loadstlEC). long lasting SERAPHIM ENERGY GROUP MANAGEMENT SYSTEM ISO 9001: Quality management system ISO 14001. Standard for environmental management system OHSAS 18001: Intemational standard for occupational heath and safely assessment system PRODUCT CERTIFICATES INSURANCE I Spea3cations are subject to charge with -t notification SEG -DS -EN -2019V1 1 G Copyright 2019 Seraph:, SEG-6MB-XXXBB SERIES 6INCH 60 CELLS w Ba.BIACK aACK.SH EET (BUCK FRAME Pk0©UCTS Electrical Char acteristies(STC) Electrical Char act eristics(NOCT) Marmum Power at NOCT-P,,(WI �°�r�i�.:��y�axaa:xtRna:>•�nxe�ssaaxutaa��xc=.*., 223 226 awl Maximum Powerat STC -P_ iW) 295 300 305 310 Open Circuit Voltage -V,x IV) 395 39.7 39 9 402 Shod Circuit Current -I� tA1 9.56 9.65 - 976 9.82 Manmum Power Votage-V, IV) 31.9 321 32.3 32.6 Maximum Power Current -I,, iA) 9.25 9.35 955 9.51 Module Etrlcienoy STC-r)a,%) 18.13 18.44 1875 _ 19-05 Power Tolerance VV. i0.+4.991 W.mum System Votage IV) 1". 15MULI M -mum Series Fuse Rating tAI 20 Fire Performance TYpe2or Type 1(UL7 Electrical Char act eristics(NOCT) Marmum Power at NOCT-P,,(WI 219 223 226 239 Open C. -it Voltage -V_Wi 36.5 367 36.8 37.1 Shat Circuit Current I a_A) 7.73 7.82 791 7.96 Maximum Power Voltage-V,,IV) "30.1 30.3 30.4 30.7 Maximum Power Current -1,, A) 7.28 7.36 7.44 7 s Temperature Characteristics Proax Tern pN ature CoeRaem V. Temperature Coe11-1 Isc Temperature Coef6tient Operating Temperature Normal Operating Cell Temperature tNOCTI Packing Configuration Container Pieces per Pale[ Pallets per Container Reces per Container Mechanical Specifications 20'GP 30 360 F03 x 992x 35 ..61571,39 06.1.37 inn, 'S Mg(� 5 6si a1o¢systa0ne. 6 nd, !BW cs.i 2- AR -.g tempe'retl gbas, tow rm ,od-d aumnum iioy 67 'AWGcatk kngm.1 on mm GF f PdStle._. STC- Irradiance 1000 W/m'. modLfe temperature 25 C AAh-1 5 NOCT. Irradiance 800 Whit'ambient temperature 20 C. wind speed tmis Specit-tions are abject to Wange without further notification. -0 38%rc -028W C +005%,C -40-.85 'C 4532 _C r�� I 1, L� o ; w 51 21 Sec4an A -A 101 All Dimensms in mm The above dravnng rs a graphical representation o1 tl1e product I-V Curve M ,111�1 BLUE RAVEN 1403 N RESEARCH WAY BUILDING J OREM. UT 84097 800-377-4480 WWW BLUERAVENSOLAR COM CONFIDENTIAL -THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUE RAVEN SOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT. WITHOUT THE WRITTEN PERMISSION OF BLUE RAVEN SOLAR LLC. ,NABCEP CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 0` F . . ... 4 Pi istOn euaa,�g Speolcalons are subject to change without notification SEG -DS -EN -2019)1.1 Z Copyright 2019 Seraphim 11 • SHEET NAME SPEC SHEET PAGE NUMBER REVISION SS 0 S.11 IaDeck 00010� FLASHED PV ROOF -MOUNT COMBINER/ENCLOSURE Basic Features • Stamped Seamless Construction • 18 Gauge Galvanized Steel • Powder Coated Surfaces • Flashes into the roof deck 0 3 Roof deck knockouts .5", .75", 1" • 5 Centering dimples for entry/exit fittings or conduit • 2 Position Ground lug installed • Mounting Hardware Included *'Fuse holders and terminal blocks added in the field must be UL listed or recognized and meet 600 VDC 30 AMP 110C for fuse holders, 600V 50 AMP 90C for rail mounted terminal blocks and 600 V 175 AMP 90C for Power Distribution Blocks. Use Copper Wire Conductors. SolaDeck Model SD 0783 SolaDeck UL50 Type 3R Enclosures Available Models: Model SD 0783 - (3" fixed Din Rail) Model SD 0786 - (6" slotted Din Rail) SolaDeck UL 1741 Combiner/Enclosures Models SD 0783-41 and SD 0786-41 are labeled and ETL listed UL STD 1741 according to the UL STD 1741 for photovoltaic combiner enclosures. Max Rated - 60OVDC, 120AMPS Model SD 0783-41 3" Fixed Din Rail fastened using Norlock System **Typical System Configuration 4- Din Rail Mounted Fuse Holders 60OVDC 30 AMP 1- Power Distribution Block 60OVDC 175AMP 1- Bus Bar with UL lug Model SD 0786-41 6" Slotted Din Rail fastened using steel studs **Typical System Configuration 4- Din Rail Mounted Fuse Holders 60OVDC 30 AMP 4- Din Rail Mounted Terminal Blocks Bus Bars with UL lug conduit or fittings, base is center dimpled for fitting locations. Model SD 078341, wired with Model SD 0786-41, wired with Din Rail mounted fuse holders, Din Rail mounted fuse holders, bus bar and power distribution terminal blocks and bus bars. block. RS TIC Enterprises, Inc . 2219 Heimstead Road • Eau Cliare, W1 54703 For product information call 1(866) 367-7782 BLUE RAVEN 1403 N RESEARCH WAY, BUILDING J OREM, UT 84097 800-377-4480 WWW. BLUE RAV E NSOLAR. COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUE RAVEN SOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT WITHOUT THE WRITTEN PERMISSION OF BLUE RAVEN SOLAR LLC. /NABCEP\ CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 City of SHEET NAME SPEC SHEET PAGE NUt<•".BER I REVISION SS 0 BLUE RAVE 3�SYSTEM BONDING & GROUNDING u MIMS 1403 N RESEARCH WAY, BUILDING J SFM TSA F e lv�' PAGE OREM, UT 84097 MICRORAIL 800-377 4480 WWW.BLUERAVENSOLAR COM TERKNALTORQUE, 1nstnl,. Conductor ar"J torque to the f a:alrlr vv, r -6 AWG: 5 5 n-ibs 8 AWG: 25 m4bs 10 -iia AVV(,:. 0 it -Lbs =nst t( Conductor and toraue to the f LLovvirg: i�-14 AVVE3, 3 5 i n - I bs WEESELUG Single Use Only instaLl Conductor and torque to the foltowing 6-14 AWG,- 7ft-tbs UG DETAIL & TORQUE INFO LUG DETAIL & TORQUE INFO 111kJG DETAIL & T I'JE INFO Ilsco Lay -in Lug (GBL-4DBT) Itsco Flange Lug(SGB-4) WiLey WEEBLug (6.7) • 10-32 mounting hardware 0 1/4" mounting hardware 0 1/4" mounting hardware • Torque = 5 ft -lb 0 Torque= 7S in -lb 0 Torque = 10 ft -lb • AWG 4-14 -Solid or Stranded • AWG 4-14 -Solid or Stranded • AWG 6-14 -Solid orStranded NOTE: ISOLATE COPPER FROM ALUMINUM CONTACTTO PREVENT CORROSION System bonding is accomplished through modules. System grounding accomplished by attaching a ground lug to any module at a location on the module specified by the module manufacturer. E -W BONDING PATH: E -W module to module bonding is accomplished with 2 pre-installed bonding pins which engage on the secure side of the MicrorailTM and splice. N -S BONDING PATH: N -S module to module bonding is accomplished with bonding clamp with 2 integral bonding pins. :eia 'lso to aiternate eiho uz 0-w TRIMRAIL BONDING PATH: Trimrail to module bonding is accomplished with bonding clamp with integral bonding pin and bonding T-boIt. CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUE RAVEN SOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUE RAVEN SOLAR LLC NABCEP` CERTIFIED P\/_1 —N§T--A LLAT'_I ON PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 oA SHEET NAME SPEC SHEET PAGE NUMBERI REVISION %_ 0 Intertek AUTHORIZATION TO MARK Total Quality. Assured. This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s) Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report. This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be applied only at the location of the Party Authorized To Apply Mark. Applicant: Unirac, Inc Manufacturer: Cixi Emeka Aluminum Co. Ltd Photovoltaic Mounting System, Sun Frame Microrail - Installed Using Unirac Installation Guide, Rev Product: No. 688 ChaoSheng Road Address: 1411 Broadway Blvd NE Address: Cixi City Albuquerque, NM 87102 Zhejiang Province 315311 Country: USA Country: China Klaus Nicolaedis Jia Liu Contact: Tom Young Contact: Robin Luo 505-462-2190 +86-15267030962 Phone: 505-843-1418 Phone: +86-13621785753 FAX: NA FAX: NA klaus.nicolaedis@unirac.com jia.liu@cxymj.com Email: toddg@unirac.com Email: Party Authorized To Apply Mark: Same as Manufacturer Report Issuing Office: Lake Forest, CA U.S.A. TUlb- Control Number: 5003705 Authorized by: �4�' for Dean Davidson, Certificati 2rManager US trsreo Intertek This document supersedes all previous Authorizations to Mark for the noted Report Number. Ths Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Inlerlek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement. for any loss. expense or damage occasioned by the use of this Authonzation to Mark. Only the Client is authorized to pemvl copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek's Cer06cahon mark is restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the tntertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect. Intertek Testing Services NA Inc. 545 East Algonquin Road, Arlington Heights, IL 60005 Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672 ATM for Report 102393982LAX-002 Page 1of1 ATM Issued: 9 -Apr -2019 ED 16.3.15 QO-Apr-17) Mandatory BLUE RavErt 1403 N RESEARCH WAY. BUILDING J OREM UT 84097 800-377-4480 WWW. BLU ERAVENSOLAR.COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUE RAVEN SOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUE RAVEN SOLAR LLC. NABCEP,, CERTIFIED PV_INSTA_LLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 01 SHEET NAME SPEC SHEET FAGS NUM I REVISION 0 Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat - Standard(s): Plate Photovoltaic Modules and Panels [UL 2703: 2015 Ed -111 Photovoltaic Mounting System, Sun Frame Microrail - Installed Using Unirac Installation Guide, Rev Product: PUB2019MAR01 with Annex North Row Extension Installation Guide Rev PUB2019FEB20 Brand Name: Unirac Models: Unirac SFM ATM for Report 102393982LAX-002 Page 1of1 ATM Issued: 9 -Apr -2019 ED 16.3.15 QO-Apr-17) Mandatory BLUE RavErt 1403 N RESEARCH WAY. BUILDING J OREM UT 84097 800-377-4480 WWW. BLU ERAVENSOLAR.COM CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUE RAVEN SOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUE RAVEN SOLAR LLC. NABCEP,, CERTIFIED PV_INSTA_LLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 01 SHEET NAME SPEC SHEET FAGS NUM I REVISION 0 1114W BLUE RAVEN for 1403 N RESEARCH WAY BUILDING J FLASHING & SLIDERS MCI PAGE OREM. UT 84097 SFM I Y! F, r U 1� 800-377-4480 WWW BLUERAVENSOLAR.COM --------------------------------------------------------------------------------------------------------------------------------------------- PILOT HOLES: Drill pilot holes far Lag screws or structural screws (as necessary) at marked attachement points FLASHINGS: Place flashings INSTALL SLIDERS AND TRIMRAIL ROOF ATTACHMENTS: 0 Insertflashings per manufacturer instructions �OTE-Use Lao, screw or structural fastener with a maxim om diameter of 5/16' • Attach sliders to rafters • Verify proper row to row spacing for module size (Mod NS + 1') • E n s u re that Tri m ra i ITM roof attachments in each row have sufficient engagement with slider dovetails for proper attachment. INSTALL SLIDERS AND ROOF ATTACHMENTS: Follow manufacturer instructions forflashing installation procedures ler -1he al-, a,,Ih"er,' rl 0 0 a a CONFIDENTIAL -THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT BLUE RAVEN SOLAR NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE RECIPIENTS ORGANIZATION. EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF BLUE RAVEN SOLAR LLC. NA B �CE P CERTIFIED PV INSTALLATION PROFESSIONAL Scott Gurney # PV -011719-015866 CONTRACTOR: BRS FIELD OPS 385.498.6700 Citi 01 I.oat Ridge "Ilng IDN'Slon Dzzo SHEET NAME SPEC SHEET PACE NUMBER REVISION SS 0 10 r i CITY OF WHEAT RIDGE Building Inspection Division -- (303)234-5933 Inspection line (303) 235-2855 Office •x(303) 237-8929 Fax INSPECTION NOTICE Inspection Type: q D9 Job Address: 3 foZ Z CzA +tel A AD S' T - Permit Number: 20120; Z61 ❑ No one available for inspection: Time g",4 (Z) AM� DM Re -Inspection required: Yes �16 When corrections have been made, call for re -inspection at 303 -234 - Date 31 19 Inspector: — DO NOT REMOVE THIS NOTICE City of Wheat Ridge Residential Roofing PERMIT - 201801261 PERMIT N0: 201801261 ISSUED: 05/02/2018 JOB ADDRESS: 3622 Garland ST EXPIRES: 05/02/2019 JOB DESCRIPTION: Reroof remove and install Asphalt Shingles with 23 squares. Pitch 4/12. House and Shed. *** CONTACTS *** OWNER (303)638-7168 JOSEF CARD SUB (303)756-7663 Ty Correy 090134 Advanced Exteriors, Inc. *** PARCEL INFO *** ZONE CODE: UA / Unassigned USE: UA / Unassigned SUBDIVISION CODE: 2406 / BEL AIRE,HILLCREST HEIGHTS, ME BLOCK/LOT#: 0 / *** FEE SUMMARY *** ESTIMATED PROJECT VALUATION: 8,800.00 FEES Total Valuation 0.00 Use Tax 184.80 Permit Fee 188.45 ** TOTAL ** 373.25 *** COMMENTS *** *** CONDITIONS *** Midroof & Final Roof inspections for ROOFS 6/12 PITCH & OVER: 3rd party inspection will be required for both the midroof and final inspections. The 3rd party inspection report AND THE ORIGINAL PERMIT CARD needs to be dropped off to the Permit Desk at the City of Wheat Ridge. The report MUST BE SIGNED by the Homeowner. REGARDING ROOF VENTILATION: Roof ventilation shall comply with IBC Sec. 1203.2 or IRC Sec. R806. The installation of ridge venting requires the installation or existence of soffit venting. For calculation purposes, one hat or turtle vent equal to one-half of one square foot of opening. Effective December 1, 2014, asphalt shingle installations require an approved midroof inspection, conducted when 25-75 percent of the roof covering is installed, prior to final approval. Installation of roof sheathing (new or overlay) is required on the entire roof when spaced or board sheathing with ANY gap exceeding one half inch exists. Sheathing and mid -roofs may be called in at the same time, one hundred percent of the sheathing must be complete and 25-75 percent of the mid -roof may be complete. Asphalt shingles are required to be fastened to the roof deck with a minimum of 6 nails per shingle. Ice and water shield is required. Eave and rake metal is required. A ladder extending 3 feet above the roof eave and secured in place is required to be provided for all roof inspections. Roof ventilation is required to comply with applicable codes and/or manufacturer installation instructions, whichever is more stringent. In order to pass a final inspection of elastomeric or similar type roof coverings, a letter of inspection and approval from the manufacturer technical representative stating that "the application of the roof at (project address) has been applied in accordance with the installation instruction for (roof material brand name) roof covering" is required to be on site at the time of final inspection. b City of Wheat Ridge xY" Residential Roofing PERMIT - 201801261 PERMIT NO: 201801261 ISSUED: 05/02/2018 JOB ADDRESS: 3622 Garland ST EXPIRES: 05/02/2019 JOB DESCRIPTION: Reroof remove and install Asphalt Shingles with 23 squares. Pitch 4/12. House and Shed. I, by.my signature, do hereby attest that the work to be performed shall comply with all accompanying approved plans and specifications, applicabble building codes, and all applicable municipal codes, policies and procedures, and that I am the legal owner or have been authorized by the legal owner of the property and am authorized to obtain this permit and perform the work described and approved in conjunction with this ermit. I further attest that I am legally authorized to include all entities named within this document as parties to the work to be per�d and -that all �rk _ e performed is disclosed in this document and/or its' accompanying approved plans and specifications. Signature of OWNER or CQ_NTRAC�ircle one) Date I . This permit was issued based on the information provided in the permit application and accompanying pplans and specifications and is subject to the compliance with those documents, and all applicable statutes, ordinances, regulations, policies and procedures. 2. This permit shall expire 365 days after the date of issuance regardless of activity. Requests for extension must be made in writing and received prior to the date of expiration. An extension of no more than 180 days made be granted at the discretion of the Chief Building Official and may be subject to a fee equal to one-half of the original permit fee. 3. If this permit expires, a new permit may be required to be obtained. Issuance of a new permit shall be subject to the standard requirements, fees androcedures for approval of any new permit. Re -issuance or extension of expired permits is at the sole discretion of the Chief Building Official and is not guaranteed. 4, No work of any manner shall be performed that shall results in a change of the natural flow of water without prior and specific approval. 5. The permit holder shall notify the Building and Inspection Services Division in accordance with established policy of all required inspections and shall not proceed or conceal work without written approval of such work from the Building and Inspection Services Division. 6. The issuance or grantin of a permit shall not be construed to be a permit for, or an approval of, an violation of any provision of any apphcacode or any oldinance or regulation of this jurisdiction. Approval of work is subject to field inspection. Signature of ChiePBuilding Official Date REQUESTS MUST BE MADE BY 11:59PM ANY BUSINESS DAY FOR INSPECTION THE FOLLOWING BUSINESS DAY. From: no-reply@ci.wheatridge.co.us Sent: Wednesday, May 2, 2018 2:31 PM To: CommDev Permits Subject: Categories: Online Form Submittal: Residential Roofing Permit Application Gina Residential Roofing Permit Application This application is exclusively for new permits for residential roofs and for licensed contractors only. This type of permit is ONLY being processed online --do not come_ to City Hall to submit an application in person. Permits are processed and issued in the order they are received and due to the volume of requests, time to process varies and is subject to change. YOU WILL BE CONTACTED WHEN YOUR PERMIT IS READY FOR PICK-UP AND WILL BE GIVEN A SPECIFIC DATE AND TIME WINDOW TO COMPLETE THE TRANSACTION. You will be notified if your contractor's license or insurance has expired, and you may update those \ documents at the time you are issued your permit. For all other requests: N Homeowners wishing to obtain a roofing permit must apply for the permit in person at City Hall. Revisions to existing permits (for example, to add redecking) must be completed in person at City Hall. All other non -roofing permits must be completed in person at City Hall. The Building Division will be open from 7:30-10:30 a.m., Monday through Friday to process these types of requests. THIS APPLICATION DOES NOT CONSTITUTE A PERMIT. DO NOT BEGIN REROOFING UNTIL PERMIT HAS BEEN ISSUED. Is this application for a residential roof? How many dwelling units are on the property? Yes Single Family Home PROPERTY INFORMATION Property Address 3622 Garland st Property Owner Name Josef Card Property Owner Phone 303-638-7168 Number (enter WITH dashes, eg 303-123-4567) Property Owner Email Address Do you have a signed contract to reroof this property? Applications cannot be submitted without an executed contract attached below. Attach Copy of Executed Contract freddygreen@advancedexteriors.net Yes 8114.pdf` CONTRACTOR INFORMATION Contractor Business advanced exteriors Name Contractor's License 090134 Number (This is a 5 or 6 digit number for the City of Wheat Ridge) Contractor Phone Number (enter WITH dashes, eg 303-123-4567) Contractor Address (Primary address of your business) 303-756-7663 2200 S VALLEY HWY Contractor Email Address freddygreen@advancedexteriors.net Retype Contractor Email Address DESCRIPTION OF WORK TOTAL SQUARES of the entire scope of work: Project Value (contract value or cost of ALL materials and labor) Are you re -decking the roof? Is the permit for a flat roof, pitched roof, or freddygreen@advancedexteriors.net 23 No Pitched roof (2:12 pitch or greater) N both? (check all that apply) What is the specific pitch 4/12 _ of the PITCHED roof? How many squares are 23 part of the PITCHED roof? Describe the roofing shingles materials for the — PITCHED roof: Type of material for the Asphalt PITCHED roof. Provide any additional house,shed detail here on the description of work.yf1s f this for a house or garage? Etc) SIGNATURE OF UNDERSTANDING AND AGREEMENT I assume full Yes responsibility for compliance with applicable City of Wheat Ridge codes and ordinances for work under any permit issued based on this application. I understand that this Yes application is NOT a permit. I understand I will be contacted by the City to pay for and pick up the permit for this property. I understand that work Yes may not begin on this property until a permit has been issued and posted on the property. I certify that I have been Yes authorized by the legal 3 owner of the property to submit this application and to perform the work described above. I attest that everything Yes stated in this application is true and correct and that falsifying information in this application is an act of fraud and may be punishable by fine, imprisonment, or both. Name of Applicant Freddy Green Email not displaying correctly? View it in your browser. (,)- t2 /Z i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 237-8929 Fax INSPECTION NOTICE Inspection Type: / 7 M- Job Address: 3 b a a G- �^ r I c• „ ' `,t , Permit Number: s ❑ No one available for inspection: Time -"W/PM Re -Inspection required: Yes When corrections have been made, call for re -inspection at 303-234-5933 Date:_S l �l' Inspector:�- DO NOT REMOVE THIS NOTICE Z� • I FOR OFFICE USE PwIpermit# 9 t "_0 �40 WIM Building Permit Application p1dH 0'T'' p§ (please print): "' I Ph664:30 `Nr A _C-r� nqr gmoil: MEE��� Address: P hone: onte 0, lo X—D re'letweek ICO _JK2 - Cvl`� Mechanical: W,R� City License Complete all, information on BOTH sides of this form Aug 1414 02:43p p,6 Inspections will not be made unless this card is posted on the k Call by 3:00 PM to receive inspection the following busines ing site ly. 6 o-A&AA Sb. V 6 o Electrical INSPECTOR MUST SIGN ALL SPACES PERTAINING TO THIS JOB FOUNDATION INSPECTIONS DATE INSPECTOR INITIALS COMMENTS: Footings /Caissons .: Mechanical Heating (Underground) Stemwall/ (CEG) Concrete Encased Ground . :DO NOT POUR FLOOR Reinforcing or Monolithic ?Sheathing; " "' 'Building Final Weatherproof / French Drain 'I 'Fire Department !.Mid -Roof Sewer Service Lines' Electrical Service Water Service Lines Rough Electric �,.., �. ONE WEEK PRIOR TO FINAL INSPECTIONS. '. POUR No CONCRETE U CONCRETE SLAB FLOOR Electrical Electrical (Underground) Plumbing Plumbing (Underground) Mechanical Heating (Underground) . :DO NOT POUR FLOOR ROUGHS ?Sheathing; " "' 'Building Final Lath / Wallttie 'I 'Fire Department !.Mid -Roof ,� ,Y 3 Electrical Service ' ZONING, FIRE AND PUBLICE WORKS Rough Electric �,.., �. ONE WEEK PRIOR TO FINAL INSPECTIONS. -Rough Plumbing � �� � a ILDING AND PUBLIC WORKS BEFORE A Gas Piping r' s.�.' s p OES NOT CONSTITUTE AUTHORIZATION. Rough Mechanical CUPANCY. ABOVE INSPECTIONS TO 81 "Framing Insulation Drywall Screw OCCUPANCY No- ABOVE HAS UEEN DIGNEU ABOVE HAS BEEN SIGNED FINALS Electrical Plumbing Mechanical Roof f :7 /O Ile, 'Building Final 'I 'Fire Department R.O.W & 'Drainage + ' ZONING, FIRE AND PUBLICE WORKS Parking & Landscaping. �,.., �. ONE WEEK PRIOR TO FINAL INSPECTIONS. * ALL ITEMS MUST BE COM � �� � a ILDING AND PUBLIC WORKS BEFORE A .CERTIFICATE OF OCCUPANCY r' s.�.' s p OES NOT CONSTITUTE AUTHORIZATION. OFA CUPANCY. 3CUPANCYISISSUED e e CITY OF WHEAT RIDGE Building Inspection Division {, f (303) 234 -5933 Inspection line (303) 235 -2855 Office • (303) 237 -8929 Fax INSPECTION NOTICE Inspection Type: GZcp /= Job Address: 4z ,4�b 5 % Permit Number: _/r5GY1 ❑ No one available for inspection: Time d AM /PM ,: Re- Inspection required: Yes * When corrections have been made, call for re inspection at 303-234-5933 Date: -�Z/ 110 inspector: DO NOT REMOVE THIS NOTICE i CITY OF WHEAT RIDGE f Building Inspection Division ( (303) 234 -5933 Inspection line (303) 235 -2855 Office • (303) 237 -8929 Fax INSPECTION NOTICE Inspection Type: f „vgt sp�G Job Address: s Permit Number: 14 ❑ No one available for inspection: Time AMZPM j Re- Inspection required: Yes _ No When corrections have been made, call for re inspection at 303-234-5933 Date: 3 �z7 ,w Inspector: Vic° DO NOT REMOVE THIS NOTICE ! s CITY OF WHEAT RIDGE Opp, Building Inspection Division j~ (303) 2345933 Inspection line (303) 235-2855 Office • (303) 237-8929 Fax INSPECTION NOTICE Inspection Type: Job Address: 57- Permit Number: r~%'l7 ❑ No one available for inspection: Time A %PM Re-Inspection required: Yes No "When corrections have been made, call for re-inspection at 303-234-5933 Date: _ 3//v Inspector: YY DO NOT REMOVE THIS NOTICE' ♦ i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 237-8929 Fax INSPECTION NOTICE Inspection Type: ;fl !r Job Address: Z y S% Permit Number: 611CJ ❑ No one available for inspection: Time AM/PM Re-Inspection required: Yes No *When corrections have been made, call for re-inspection at 303-234-5933 Date: S f0 Inspector: A/"c~~4~ DO NOT REMOVE THIS NOTICE 9. Board 'sheathing spaced more lay on entire roof. Ice and exterior walls. ***Contractor in place for inpsections. It zg the inspection to insure ions that cannot be performed to 8:30 a.m. on the day of be assessed. Subject to 'field 7500 W. 29`.. Ave., Wheat Ridge, CO 80033 Office: 303-235-2855 " Fax: 303-235-2857 o Inspection Line: 303-234-5933 Building Permit Application Property Owner (please print): f~ Mailing Address: (if different than property address) Plan Permit Phone: _ yo(y Address: City, State, Zip: -f Contractor License ID Phone: -3cG'' oaf q 2 Electrical City License Company: Exp. Date: Plumbing City License Company Exp. Date: Mechanical City License Company: Exp. Date: Use of s ace descri tion): Construction Value: $ 5100 (as calculated per the Buildina Valuation Data sheet) Plan Review (due at time of submittal): $ Sq. Ft./L.Ft added: Squares BTU's Gallons Amps OWNERICONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT I hereby certify that the setback distances proposed by this permit application are accurate, and do not violate applicable ordinances, rules or regulations of the. City of Wheat Ridge or covenants, easements or restrictions of record; that all measurements shown, and allegations made are accurate; that 1 have read and agree to abide by all conditions printed on this application and that I assume full responsibility for compliance with the Wheat Ridge Building Code (I.B.C) and all other applicable Wheat Ridge Ordinances, for work under this permit. Plans subject to field inspection. CIRLCE ONE:: ( (CONTRACT RR~}\ or PERSONAL REPRESENTATIVE of(OWNE (CONTRATOR) i~ PRINT NAME: c~ ~a~] SIGNATURE: I Date: )0 " ' City of Wheat Ridge .rr Residential Electric PERMIT - 090524 PERMIT NO: 090524 -ISSUED: 05/21/20.09 JOB .ADDRESS:' 3622 GARLAND ST- EXPIRES: 11/17/2009 DESCRIPTION:.. 200 amp:. service change; ***CONTACTS owner Ruth Card sub 303/862-6777 Bill Mazowski 02-1663 Ben Franklin Electric -PARCEL -INFO ZONEI CODE: UA USE: UA- SUBDIVISION: 0624' :BLOCK/LOT#: 0/' **FEE SUMMARY ESTIMATED PROJECT VALUATION: 2,250.00 FEES Permit Fee 216.60 Total Valuation .00 Use'. Tax 81.00 **:TOTAL 297.60 Conditions: Fees >doubled :.for doing work without permit Mustcomply w/ 2003:IRC & 2005 NEC..' Subject to field inspections. I hereby certify that the setback distances proposed by this permit application are accurate, and do not violate: applicable ordinances, rules or egulationa of the city of Wheat Ridge or covenants, easements or restrictions of record; that all measures shown and allegations made are accurate; that '.I have read and agree to abide by all conditions printed on this applrc ion n t I ass me full responsibility for compliance with the Wheat Ridge Building Code (I.B.C) and all other appli able eat' e nances, for work under this permit. Plans subject to field inspection. Signature ofcntractor/owner 'date 1. This pe mi was issued in accordance with the provisionsr set forth in your application and is subject to the laws of the State of clorado and to the Zoning. Regulations and Building Codes of Wheat Ridge, Colorado or any other applicable ordinances of. the City. 2. . This permit; shall expire:. 180: days. from.. the issue date.. Requests for an. extension. must be received prior to expiration -date. An extension maybe granted at the discretion of the Building: Official. 3. If this permit' expires,. a new permit may be acquired fora fee of one-half the amount normally required, provided no - changes have been or will be made. in the original plans and specifications.. and any suspension or abandonment' has not exceeded one (1) year. If changes have been or if suspension or abandonment exceeds one (1) year, full. fees. shall be. paid for a new permit. 4.. No work of any manner shall be done: that will change the natural flow of water causing a: drainage. problem. 5.r Contractor' shall notifythe Building` Inspector twenty-.four (24) hours in'. advance for all inspections and shall receive written approval. on inspection card before proceeding. with successive.. phases of the job. 6 The issuance of a permit or the approval of:. drawings and specifications shall not be construed to be a permit for, nor an ,approval:. of, any violation of the provisions of the. building. codes or any other ordinance, law,. rule or:. regulation. All plan review i a tto field inspections. Signature of'Chi Bu' ing.Official 'date INSPECTION' EQUEST LINE: (303)234-5933 BUILDING OFFICE: (303)235-2855 REQUESTS MUST BE.. MADE BY 3PM ANY. BUSINESS: DAY FOR'INSPECTION THE FOLLOWING'.. BUSINESS DAY. - OF W HEgT v ~m oo<oaPOo City of Wheat Ridge Building Division 7500 W. 29th Ave., Wheat Ridge, CO 80033 Office: 303-235-2855 * Fax: 303-235-2857 Inspection Line: 303-234-5933 Property Address: Property Owner (plee Mailing Address: (if different than property address) Address Date: or Plan Permit City, State, Zip: j~/ Contractor: Contractor License Phone: Z7,--V4f Sub Contractors: Electrical City License Plumbing City License Mechanical City License Company: Company Company: Exp. Date: Exp. Date: Exp. Date: Approval: Approval: Approval: Use of space (description): Construction Value: $ l D'escnptj-Qn of work: (as calculated per the Building !Mn Data sheet) Plan Review (due at time of submittal): $ IDU~ 70 ~/y Sq. Ft./L.Ft added: Squares BTU's Gallons - Amps.`" f.7i~~-'oo' Building Permit Application ai ♦ i CITY OF WHEAT RIDGE Building Inspection Division (303) 234-5933 Inspection line (303) 235-2855 Office • (303) 235-2857 Fax INSPECTION NOTICE Inspection Type: W~fell- ri%~ Z Job Address: 36~ ~d~~j~v sr Permit Number: ~"c3/GI S r: E I, ❑ No one available for inspection: Time AM/PM Re-Inspection required: Yes CN *When corrections have been made, call for re-inspection at 303-234-5933 Date: Inspector: DO NOT REMOVE THIS NOTICE Tax 17 . 55 ~ OTAL 67.95 tions: ict to field inspections qty certify. that the setback distances proposed by this permit. application are accurate, and do not violate applicable:'. inces, rules or regulations of the City of Wheat Ridge or covenants, easements or restrictions of record; that all cements sho , a allegations made are accurate; that I have read and agree to abideby all conditions printed on this Satron an~.that I assume full responsibility for compliance with the Wheat Ridge Building Code '(I B C) andall other ;able//,, //at~Rid Ordinances, for work under this pet. Pike subject to field inspection 61~ 17/7 u- pf c nt actor/owner date a permit was issued in accordance with the provisions set forth in your. application and is subject to 'thelaws of the rte of Colorado and to the Zoning Regulations and Building Codes of Wheat Ridge, Colorado or any other applicable finances of the City. .s permit shall expire 180 days from the issue date. Requests for an extension must be received prior to expiration :e. An extension may be granted at the discretion of the Building Official. this permit expires, ;a new permit may be acquired for a fee of one-half the amount normally required, provided no inges have been or will be made in the original plans and specifications and any suspension or abandonment has not !eeded one (1) year. If changes have been or if suspension or abandonment exceeds one (1) year, full feesshall paid for a new permit work of any manner shall be done that will change the natural flow of water causing a drainage., problem itractor shall notifythe Building Inspector twenty four (24) hours in advance for all inspections and shall receive ;tten approval on inspection card before proceeding with successive phases of the job. issuance of a permit or the approval of drawings and specifications shall: not be construed to be a permit for, nor < approval of any violation of the provisions of the building codes or any other ordinance, law, rule or regulation plan review is s ec to field inspections. T'd OT6TOBilEOE sold gwnTd wuil:oT 6002 ET qad i CITY OF WHEAT RIDGE j ' Building Inspection Division (303) 234-5933 Inspection line ~~JJ (303) 235-2855 Office ' (303) 235-2857 Fax INSPECTION NOTICE Inspection Type: Job Address/Permit Number: ?2 41o,44, o sue. ❑ No one available for inspection: Time AM/PM Re-Inspection required: 'Yes (t[9 'When corrections have been made, calf foor-re-inspection . at 303-234-5933 Date: rT Inspector: ;_6 DO NOT REMOVE THIS NOTICE City of Wheat Ridge s Residential Plumbing PERMIT - 090090 PERMIT NO:' 090090 ISSUED: 02/11/2009 All JOB. ADDRESS.:. 3622. GARLAND ST EXPIRES: 08/10/20.09 DESCRIPTION:. Repair .4 if of jsewerline in yard M CONTACTS - owner Owner/Occupant 4 ' 303/595-3000 James Blissett 06-0051 Drain "0" Rooter sub° . va * * PARCEL INFO ZONE CODE: UA - -.USE: UA SUBDIVISION.:.. ....0001 .BLOCK/LOT#: ,0/. ,,1. ' b **.FEE SUMMARY ESTIMATED PROJECT VALUATION.: 3,000.00 ' FEES . 7 Permit Fee 108.30 I/ry - Total. Valuation .00 x Use Tax 54.00 **TOTAL .162.30 N Conditions: Subject to field inspections. e Note: Owner/Contractor is responsible for locating proeprty lines and s constructing improvements according to the approved plan and required development standards. The City..is,not responsible for inaccurate information submitted within the plan set and any construction errors resulting from M inaccurate information. nd do not violate applicable lication are accurate : rmit a h h b k di s d b thi ' a . , stance pp e set ac propose y s pe I hereby certify t at t :ordinances; rules or regulations. of the City of Wheat Ridge or covenants, easements. or restrictions of record; that all measurements shown, and allegations made are accurate; that I have read and agree. to abide' by all conditions printed on this application and that I assume full responsibility for compliance with the Wheat Ridge. Building Code (1.13.C) and all other for work under this permit. Plans Subject to field inspection. antes, applicable Wheat Ridge Or 3 . / y Signa ure ofcontractor/o r date 1. This permit was issued in accordance with the provisions set forth in your application and is subject to the laws of the State of Colorado and to the Zoning Regulations and Building Codes of Wheat Ridge, Colorado or any other applicable. - A ordinances of the City. 2. This permit shall expire 180 days from the issue date. Requests for. an extension must be received prior to expiration ' " . of the Building: official. An extension may be granted at the discretion date. 3. If this. permit expires, a new permit may be acquired for a fee of one-half the amount normally required, provided no 3 changes have been or will be made in the original plans and specifications and any suspension or abandonment has not - exceeded one-(1)year. -.If changes have. been or if . suspension or. abandonment. exceeds one (1). year, full fees shall be paid for a new permit. 4. No work of any manner shall be done that will change the natural flow of water causing a drainage problem. ` 5. Contractor shall notify the Building Inspector twenty-four (24) hours in advance for all inspections and shall receive E) written approval on inspection card before proceeding with successive phases of the job. 6. The issuance of apermit or the approval of drawings. and. specifications shall not be construed. to.. be a: permit for, nor an approval of, any violation of the provisions of the building codes. or any other ordinance, law,. rule or regulation. S All plan review is subject field inspections. fi Signature of Chief Bu di Official date 'I INSPECTION RE EST LINE: (303)234-5933 BUILDING OFFICE: (303)235-2855 REQUESTS MUST BE MADE BY 3PM ANY BUSINESS DAY FOR.. INSPECTION THE FOLLOWING.. BUSINESS DAY.' ~a ) N City of Wheat Ridge Building Division 7500 W. 29t" Ave., Wheat Ridge, CO 80033 Office: 303-235-2855 " Fax: 303-235-2857 Inspection Line: 303-234-5933 Date: - ( ( Plan Permit#: Qq O V Building Permit Application Property Address: 6, u Property Owner (please print): Phone: Mailing Address: (if different than property address) Address: F5-7 6tl City, State, Zip: I Contractor: / 6/1 -C-) Contractor License Phone: Q 3 U Sub Contractors: Electrical City License Plumbing City License Mechanical City License Company: Company Company: Exp. Date: Exp. Date: Exp. Date: Approval: Approval: Approval: Use of space (description): Aepk co Y"C Wv, , Fro Construction Value: $ 4 000 r Description of work: y- (as calculated per the Building Valuation Data she Gi et) 740 S rr~f-~ a~s I` . Plan Review (due at time of submittal): $ Sq. Ft./L.Ft added: ~ Squares BTU's Gallons Amps OWNER/CONTRACTOR SIGNATURE OF UNDERSTANDING AND AGREEMENT I hereby certify that the setback distances proposed by this permit application are accurate, and do not violate applicable ordinances, rules or regulations of the City of Wheat Ridge or covenants, easements or restrictions of record; that all measurements shown, and allegations made are accurate; that I have read and agree to abide by all conditions printed on this application and that I assume full responsibility for compliance with the Wheat Ridge Building Code (I.B.C) and all other applicable Wheat Ridge Ordinances, for work under this permit. Plans subject to field inspection. CIRLCE ONE:: (OWNER) (CONTRACTOR 7 or PERSONAL REPRESENTATIVE of (OWNER) (CONTRATOR) J/ c PRINT NAME- //'r ~~•K w SIGNATURE: Date: ,2 ~r7 O DEPARTMENT USE ONLY ZONING COMMENTS, Zoning. Reviewer: PUBLIC WORKS COMMENTS: Reviewer: BUILDING DEPARTMENT COMMENTS Reviewer: FIRE DEPARTMENT:: ❑ approved w/ comments ❑ disapproved ❑ no review required Bldg Valuation: OCCUPANCY: